Age | Commit message (Collapse) | Author |
|
Use commit 4f07ffa8f5ab ("Use #if instead of #ifdef for ENABLE_GSHADOW")
from upstream to check ENABLE_GSHADOW correctly that is defined as 0
in case of musl.
While there replace specific patch with one from upstream that does
exactly the same commit 66a5b5ce9b99 ("basic/user-util: properly protect
use of gshadow").
(From OE-Core rev: c9580ef0810196f6703567d9db458b73dbbfb35f)
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 6f010c9b7777aae5ce2108122d0c6d3b1d630a21)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Licence checksum updated because the copyright dates were changed.
(From OE-Core rev: f3896b69c78abeaefc1c60e7a6d7b2ed85eb7015)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
meson has been found to set it erroneously.
(From OE-Core rev: 920824125eb87928a329a072fa6c5a839efc932b)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PRINTF settings no longer seem necessary (tested with mingw).
Add meson-specific bits to Enable-more-tests-while-cross-compiling.patch and
0001-Install-gio-querymodules-as-libexec_PROGRAM.patch
Add 0001-Set-host_machine-correctly-when-building-with-mingw3.patch
to allow 'mingw32' as target machine in addition to 'windows'.
Add 0001-meson.build-do-not-hardcode-linux-as-the-host-system.patch to
correct ARM build errors.
Drop configure-libtool.patch (autotools-specific).
Fix API docs generation
(From OE-Core rev: e185235dd97510bfdc621cef9c18d8d13b16006d)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop 0001-Disable-tests-in-native-builds.patch as upstream has fixed the issue.
Rework 0001-Fix-a-couple-of-decisions-around-cross-compilation.patch to
enable generation of loaders.cache in target builds (using a native tool),
because otherwise building tests becomes impossible.
Rework 0002-Work-around-thumbnailer-cross-compile-failure.patch into
0003-target-only-Work-around-thumbnailer-cross-compile-fa.patch
(which deals with substituting native tools in cross builds) and
0004-Do-not-run-tests-when-building.patch (which avoids running
test binaries during cross builds).
Rebase fatal-loader.patch.
License checksum updates as COPYING file had 2.0 version of LGPL and
has been replaced with 2.1 version.
Take meson's x11 and installed_tests options into use.
Install gdk-pixbuf-query-loaders also into $bindir, as we need the native
version during cross compile.
(From OE-Core rev: 8fb16df2e6977bb3508239eb8d447b8c5401d5ed)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop autotools-specific patches.
Rework jku's thumbnailer patch into meson configuration.
(From OE-Core rev: 9a1fa28c70882a514d189799df8dd087059d79d9)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop the autotools-specific patch.
(From OE-Core rev: ebbd49f952ddab952b5e1b7596330401087343e3)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu has been using libepoxy for a long time, and libepoxy loads GL via dlopen()
only when instructed to.
(From OE-Core rev: d974e0e9a290d66b702e5ca1d01873282763437b)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: cd4cdecd01c305b83a7483e44edb6ba856821148)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Until now an unoffcial mirror was used, which may or may not
be maintained in the longer run, as the need for it has gone.
Also, the official mirror has version tags which allows us
to track upstream development in an automated manner.
${S} has changed as upstream decided to use a monorepo for all
of the llvm-related projects.
Further info:
https://www.phoronix.com/scan.php?page=news_item&px=LLVM-GitHub-Mono-Repo
https://llvm.org/docs/GettingStarted.html#checkout-llvm-from-git
(From OE-Core rev: 18f565f3ca18c281b4a99721fcfcbcc5405d6346)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ltp doesn't build cleanly with the stringformat security flags, work around
this until upstream sorts out the issues.
(From OE-Core rev: ce0e5719c9b10121c32be67237b88b0289499f2f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch has been refreshed:
* 0008-Check-if-__GLIBC_PREREQ-is-defined-before-using-it.patch
These patches have been dropped as they have been merged:
* 0001-netns_helper.sh-use-ping-6-when-ping6-is-not-avaliab.patch
* 0001-setrlimit05-Use-another-method-to-get-bad-address.patch
* 0001-sigwaitinfo01-recent-glibc-calls-syscall-directly.patch
* 0001-statx-fix-compile-errors.patch
* 0001-syscalls-fcntl-make-OFD-command-use-fcntl64-syscall-.patch
* 0001-getcpu01-Rename-getcpu-to-avoid-conflict-with-glibc-.patch
This patch has been added:
* define-sigrtmin-and-sigrtmax-for-musl.patch
Added these rdependencies:
* file: for ld01, file01 and logrotate
* quota: for quota_remount_test01
(From OE-Core rev: d198364c1007aab6523787f9e1bb6bb274cc89ad)
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 7a2645575092684eec4bf7d96185f9e89141f4fe)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
GTK_THEME instructs gtk to use its built-in theme. Otherwise
gtk attempts to use the theme from the host, which may be from
a totally mismatching gtk version.
On the other hand FONTCONFIG_PATH tells it to use the host fonts,
as providing fonts in the native sysroot and instructing the components
to use them is a lot more tricky.
GDK_PIXBUF_MODULE_FILE is set, because otherwise qemu works but
fills stdout with error messages, which eventually fill the pipe
they go into. That pipe is read from only when qemu exits (to
collect any error messages) by runqemu script. The pipe fill-up
causes the qemu process to lock up.
(From OE-Core rev: d5b8a65861adba298a9dc2c4e9a7a7da5490073a)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
| In file included from /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/include/ui/egl-context.h:5,
| from /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/ui/egl-context.c:3:
| /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/include/ui/egl-helpers.h:46:55: error: unknown type name 'Window'; did you mean 'minor'?
| EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win);
| ^~~~~~
| minor
(From OE-Core rev: 01324f5e741a106cdb4b2989379f71b0b727a224)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xgettext/msgmerge is used during do_install() when gtk is enabled:
https://github.com/qemu/qemu/blob/master/Makefile#L743
(From OE-Core rev: 2ae8cae7b047f7ffc2a3820f5388a382f261ae3a)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The diagram had a typo in it ".ipd" rather than ".ipk".
Fixed and dropped in the figures folder for each manual.
(From yocto-docs rev: d39d196713a68df8d298f6ed0f40899bc148a323)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #13146]
I added some information to the "Using menuconfig" section to
indicate two host packages that must be installed in order for
menuconfig to run.
(From yocto-docs rev: 4f5b12ebe8f8c0ab23001b8fc770295dc585429c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 8a64478540dcaad5e79d5ef494f9086a3c8a50a1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Needed to have a predictive number of tags and branches
in the example commands that assume a released 2.7 version.
(From yocto-docs rev: b9f302cf819dbe759b560f4586edaedfae13e3d9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 93fabeb457ba98dc3a328a5951b82f5419276c8f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #13112]
Added a reference in the FILESOVERRIDES variable description
to the FILESPATH description to see an example of how automatic
overrides work.
(From yocto-docs rev: e78fc3468de3d9b9935f0e4f4aa4117b6805e631)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were a couple of problems with the multiconfig dependency resolution:
- the "if mc" condition triggering this code wasn't correct, it needs
to be "if more than one multiconfig" configured
- after adding providers we need to call add_unresolved again
and rebuild mcdeps within the "while new" loop
By fixing these issues we allow various other combinations of multiconfig
builds to work which previously didn't.
[YOCTO #13090]
[YOCTO #13130]
(Bitbake rev: 4359b037de578095db2595f119dfb8e3340e1414)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was already a fix to ignore some multiconfig dependencies but its
'opposite' case wasn't covered. Cover that combination to so as to avoid
tracebacks in multiconfig builds.
[YOCTO #13090]
[YOCTO #13130]
(Bitbake rev: c883dfe378af9dfc192a8e392e84325d68648806)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The consumers of BB_TASKDEPDATA in OE metadata can't cope with multiconfig
dependencies. The choice is either to start adding code to each of them to
filter out multiconfig dependencies, or do this at source.
After consideration we've decided to do this at source as doing otherwise
is code duplication and error prone and in any case we've looked at, they
don't make sense.
[YOCTO #13090]
[YOCTO #13130]
(Bitbake rev: 531dcd221a10853f45cc057b52bb2d5083e0ee42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This component enables hardware-accelerated GL inside QEMU guests.
For more information, see here:
https://lwn.net/Articles/767970/
https://www.collabora.com/news-and-blog/blog/2018/02/12/virtualizing-gpu-access/
https://www.collabora.com/news-and-blog/blog/2018/05/09/gpu-virtualization-update/
(From OE-Core rev: 27d54985e4581904d7c4e0b849e88ffa69209827)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The warnings deal with two specific cases of failure:
1) unable to execute nativesdk postinsts for mingw SDKs because
they need to be run under wine
2) unable to execute target postinsts when there is no qemu
usermode support for the target
Neither of these should be a big problem as mingw issue was never
found to problematic, and target postinsts deal with things that
are needed at runtime and not at build time which is the purpose
of SDKs.
The specific reason to do this is to reduce the amount of warnings
shown by the Yocto autobuilder, to zero eventually.
(From OE-Core rev: cbc32fcd9b52e750600cce9dd84b33e3ce612eae)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 98d7eb29c52b1a050bdfeec8af8338ea27b4b3ba)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade dpkg from 1.18.25 to 1.19.4:
* update SRC_URI which DEBIAN_MIRROR
* un-export PERL which causes script scripts/dpkg-architecture.pl fails
to get cpu type and package arch
* add configure option '--disable-update-alternatives' which causes
installed-vs-shipped issue
* add patch for dpkg-native to resolve host tar may not support
options --owner=NAME:ID and --group=NAME:ID
* update context of patches
* drop dpkg-configure.service that apt provides a systemd timer to do it
(From OE-Core rev: 5185b6fe3d4fa9b53baffa6ee419da60ac056da2)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the use of an alternate SSH executable for deploy-target and
undeploy-target. The command can be specified with -e / --ssh-exec.
(From OE-Core rev: c2684740d7fd3aeb60b3ec7888000097effe82f4)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: a0e8cdd7256cf1f000f5338b010f5f1f9149dab0)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Explicitly link in libfribidi
(From OE-Core rev: e1e7064746c892544cb3bb72b54791cec2818ffd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: d83599f0781314eecddf95ce72fc0ce6d9a073b0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 2325e05ac4d778b7c5dcf80b92b668bfacfff0b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: c90e9b95325d2d2645752776fcc7d7f78d6afc88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 59062ff94f9b3fe0ce22a497e90a2224554506ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ab4b0aed95abc4facc63a817b05fbd423ab67a5b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 2d52ca3beacfd7a91581afa3fb02481f292869e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 5624657ac127f1adfd867d04c5a361e74e2d31d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 0da1ae8322763c0b75e977ff40275fa4220140d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The license checksum changed due to a change in copyright years.
(From OE-Core rev: ee3057bf109b2d11ecb0089c2c424e9b6033932e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 8c428ead6baeafbd583c864d610ec7ef048d0fa2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: c675a07fd820e47d2a13211cdc6496a09ddb5b3b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The license checksum changed as the copyright years changed.
Fixes:
- CVE-2018-16890: NTLM type-2 out-of-bounds buffer read
- CVE-2019-3822: NTLMv2 type-3 header stack buffer overflow
- CVE-2019-3823: SMTP end-of-response out-of-bounds read
(From OE-Core rev: 41c3ee4fe87a181786c47da044da700e8f605540)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the use of opengl for native and nativesdk packages.
Based on https://patchwork.openembedded.org/patch/158748/
(From OE-Core rev: 4a94dc8daab8890aaff36ffafdfe2feaa52902d4)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using a native specific packageconfig option, we now set
the swrast as the supported driver.
Currently the native version does not build any dri drivers at all.
This is intentional: mesa-native is used only by virgl, so was made
the most minimal possible configuration for mesa-native so that a)
virgl works; and b) build time is as short as possible.
There are two swrast drivers, one dri-based, another gallium-based.
Autotools lets you build both, meson forces you to choose.
Thus DRIDRIVERS = "swrast" is only set for _native, as for _target
we get the gallium driver instead.
See discussion here [1]
Based on https://patchwork.openembedded.org/patch/158748/
[1] https://patchwork.openembedded.org/patch/158806/
(From OE-Core rev: 223ee432b908180932bf70e77d4058964d7f0786)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Refresh all patches.
- Remove "Use Python 3 to execute the scripts" patch
Commit 986033a2750c1160a4cef3c8418fc7f9e2b4fb5a add support
for both python 2 and 3.
- Remove "dri: i965: Add missing time.h include" patch
Commit 3c288da5eec81ee58b85927df18d9194ead8f5c2 add time.h
header file.
- Remove --enable-texture-float.
Commit 66673bef941af344314fe9c91cad8cd330b245eb remove option to
unconditionally enable floating-point textures.
- Commit 30b10dbb7c6f6bdf3e489620f8333c727bd3a6dd moved
${sysconfdir}/drirc to ${datadir}/drirc.d/00-mesa-defaults.conf
Add 00-mesa-defaults.conf to mesa-megadriver package
- Stop removing ${sysconfdir}/drirc on do_install_append
- Fix upgrade path from mesa to mesa-megadriver
- Add patch to fix mesa-native build
- Add xrandr to X11_DEPS
(From OE-Core rev: 9ddd6add68f07fb7b3f264cee7c853ffe4a1b43e)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The perl-cross uses PERL_API_VERSION but not PERL_VERSION to define
libperl soname: libperl.so.$PERL_API_REVISION.$PERL_API_VERSION.$PERL_API_SUBVERSION.
For perl stable releases, the PERL_API_SUBVERSION is always 0. Specify
the so version for libperl to make sure the libperl.so can be linked to
the correct library.
(From OE-Core rev: 6257fcd86e63fe533aeaadbc65a54213b4885c16)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake gdk-pixbuf gdk-pixbuf-native
bitbake build-sysroots -c build_target_sysroot
can lead to tracebacks as gdk-pixbuf-native is being installed into the
target sysroot. The issue is that the x86_64 (common BUILD_ARCH) sysroot
components directory can contain a mix of native and target artefacts.
Differentiate by the "-native" in the recipe names. Should also trim
down the size of the sysroot used in eSDK.
(From OE-Core rev: 57f32836060bba0eaa6b36f53146dd6fd07b77ed)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|