| Age | Commit message (Collapse) | Author |
|---|
|
Previously, if the gshadow file did not exist in the sysroot when
perform_groupmems() was run, it would be temporarily created and
removed again afterwards. This was supposedly due to groupmems failing
if it does not exist.
However, based on empirical testing and examination of the source code
for groupmems, it should not fail if the gshadow file does not exist
when groupmems is started. But it WILL fail if the file is removed
sometime after its existence has been check at the beginning of the
execution, but before it needs to be modified. And this is exactly
what the previous code in perform_groupmems() could cause if multiple
tasks simultaneously modified users or groups. It could cause any of
the useradd, groupadd and groupmems commands to fail as long as at
least one other recipe invoked perform_groupmems().
(From OE-Core rev: 4fcaa484a2e8046cf3277b5d14933cdaa94a4c3f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable building of mkfs.bfs, which is used to create
BFS file-systems used by SCO UnixWare. This is highly
unlikely to be utilized and there are otherwise no
references to 'bfs' throughout the rest of the tree.
(From OE-Core rev: 3226d89ff743c223181fda90f605c7579337941a)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable building of {mkfs,fsck}.minix, which are used
to support minix file-systems. Minix predates Linux and
support for its file-systems is unlikely to be needed.
No recipes otherwise reference minix, except in patches
to autotools configuration scripts, so there should be no
impact to other recipes.
(From OE-Core rev: fc66762d7c112fb798c2444dd902ce03baf975c4)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This causes the default timeout to be set to infinity, it will still report out
every 5000 milliseconds
(From OE-Core rev: fd9e1ba8f70402bd3c4b873d349057f96f5bcb19)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default cmake will auto-detect if a library is present on the host and if it
isn't present will use an internal fork. For some libraries using the internal
fork is preferable as it can be built with less dependencies, but for others
we're either already building it or the impact of building it is comparable to
internal build.
Continue to use the internal fork of libarchive as our libarchive-native has a
large number of build dependencies. Using the internal libarchive means that
system bzip2 and zlib must be used.
Explicitly use the internal fork of jsoncpp as we don't have this in oe-core.
Explicitly depend on curl-native, expat-native, and xz-native to ensure these
dependencies are not floating. curl-native is a non-trivial dependency but is
comparable to building the internal fork, so there's no reason to build it
twice.
Change bzip2-native to bzip2-replacement-native as bzip2-native is
ASSUME_PROVIDED.
[ YOCTO #9639 ]
(From OE-Core rev: f9366799aaf4ad2b98345743c7129fa94d092880)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intention here was "everything but jsoncpp is system provided" so use the
convenience option to ensure this remains true in the future.
(From OE-Core rev: f863b227e22b67ab239ee6124471fdc14de3f017)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New script for comparing buildstats from two separate builds. The script
has two modes: normally it prints the differences in task execution
(cpu) times but using --ver-diff option makes it just print the recipe
version differences without any cpu time data. Other command line
options are provided to alter the sort criteria of the data and to
filter out insignificant differences and/or short tasks.
(From OE-Core rev: e707718374ce1c95769a5f99aa3bfdfc0be685b2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously the following commit in oe-core move RPM metadata
from DEPLOY_DIR to WORKDIR.
-----------
commit a92c196449c516fe51786d429078bbb1213bb029
Author: Stephano Cetola <stephano.cetola@linux.intel.com>
Date: Wed Aug 10 13:03:16 2016 -0700
Allow for simultaneous do_rootfs tasks with rpm
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
-----------
In the modification of 'class RpmIndexer, it should not
directly set arch_dir with WORKDIR. It caused 'bitbake
package-index' could not work correctly.
Assign WORKDIR as input parameter at RpmIndexer initial time
could fix the issue.
(From OE-Core rev: 3c8c8501d0a19b566a94a9e06afe40642b444958)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The groupadd from shadow does not allow upper case group names, the
same is true for the upstream shadow. But distributions like
Debian/Ubuntu/CentOS has their own way to cope with this problem,
this patch is picked up from CentOS release 7.0 to relax the usernames
restrictions to allow the upper case group names, and the relaxation is
POSIX compliant because POSIX indicate that usernames are composed of
characters from the portable filename character set [A-Za-z0-9._-].
(From OE-Core rev: 31c6c8150394de067085be5b0058037077860a8a)
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The "forever" package, despite its innocent description, actually drags
in a surprising number of dependencies and as a result the nodejs test
takes up to 10 minutes as a result. Pick a different example with a much
more reasonable set of dependencies.
Addresses part of [YOCTO #10254].
(From OE-Core rev: 638ee71da967f093071ba25e0ea5c467dab65339)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
40 character paths work OK for device nodes in /dev but not for
device nodes created in a chroot, LXC container, etc.
Since the 'path' array is already a 4k buffer, the sscanf 40
character limit seems to be a typo or historical mis-merge. Update
the sscanf limit and bring the code in sync with the Buildroot
version:
https://git.buildroot.net/buildroot/commit/?id=8876b6751e0bc19a3754290061808f0f8420708e
(From OE-Core rev: e8022d00c34e37300c1c06f712c7ced5e03d2a57)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This logs the launch command that was used for runqemu while running -c
testimage. This way, if I'd like to easily launch qemu manually in
order to debug a failed test, I know what commmand was run to create
the qemu instance.
(From OE-Core rev: 34aa20c6f323bbf7ad53beb643126e4e03634708)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class adds a new task for all the recipes to use
cve-check-tool in order to look for public CVEs affecting
the packages generated.
It is possible to use this class when building an image,
building a recipe, or using the "world" or "universe" cases.
In order to use this class it must be inherited and it will
add the task automatically to every recipe.
[YOCTO #7515]
Co-authored by Ross Burton & Mariano Lopez
(From OE-Core rev: d98338075ec3a66acb8828e74711550d53b4d91b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cve-check-tool is a program for public CVEs checking.
This tool also seek to determine if a vulnerability has
been addressed by a patch.
The recipe also includes the do_populate_cve_db task
that will populate the database used by the tool.
[YOCTO #7515]
(From OE-Core rev: 5deadfe634638b99420342950bc544547f7121dc)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake doesn't use autotools, the functions get replaced by either cmake.bbclass
(target) or the recipe itself (native) leaving just lots of superfluous
dependencies.
(From OE-Core rev: b8700e9fd30317d0ad583febb4e6f385284bdd51)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
MIPS64 target was being configured for linux-mips which defaults to
MIPS32. Doesn't cause any issue as far as I can see but it would be
wiser to use the correct target configuration.
Also add MIPS64le configuration which is missing.
(From OE-Core rev: 0afec72913bc31d315cba079da317e8b28755ded)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To help debug failures, redirect stderr to stdout in oeSDKTest.run() and
oeSDKExtTest.run().
(From OE-Core rev: 4cd143e0de7f0082f60f273f442f6255f28ec3e7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previous work to clean up the license QA code (oe-core fbdf977) had the side
effect that failing the license sanity check (bad or missing LIC_FILES_CHKSUM)
would emit an error message but wouldn't actually abort the build.
Solve this by changing populate_lic_qa_checksum() so that it tracks if the
message class was in ERROR_QA and if so, aborts the function.
[ YOCTO #10280 ]
(From OE-Core rev: 5ba1a7505b904a4aa2118fa9614d76df97597af8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you bump the PR of sgml-common and openjade-native but not sgml-
common-native, you will see a failure as files were removed from the
sysroot but still referenced by the sgml docbook catalog.
To properly handle this, the clean function needs to run at sstate
removal time, the problem is that this sstate removal can happen when
the metadata isn't present, so the correct removal commands are
unknown.
To avoid this, we need to write the commands into a "postrm" script
when we install the files, this can then be executed at sstate removal
time.
[YOCTO #8273]
(From OE-Core rev: cdae3e76232110903d124195b036e4e70fb28aa4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some issues in sstate which can't be handled by file removal
alone. Currently there is no way to execute a command against sstate and
doing so is potentially problematic for things like dependencies. This
patch adds a mechanism where any "postrm" script is executed if its present
allowing some openjade/sgml issues to be resolved.
[YOCTO #8273]
(From OE-Core rev: 2268efd0cd3ddb40870c4c424d10444ba86d2849)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
for BRLayer'
(Bitbake rev: 3c762873bb8dc8a3cf89b26579a38d58f6731e04)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Users are surprised when dirs/cleandirs aren't acted upon for
empty functions. This reorders the code slightly so that those
flags are acted upon for empty functions as there are cases where
this is expected.
[YOCTO #10256]
(Bitbake rev: 5bf874673d75b5f4ff2b34f0ab8502558ee84d00)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The implementation of SRCREV_FORMAT has at least two issues:
1. Given two names "foo" and "foobar" and SRCREV_FORMAT = "foo_foobar",
"foo" might currently get substituted twice, and "foobar" not at
all.
2. If the revision substitued for some name happens to contain another
name as a substring, then that substring might incorrectly get
replaced.
Fix both issues by sorting the names with the longest ones first and
replacing all names at once with a regular expression. This was inspired
by
http://stackoverflow.com/questions/6116978/python-replace-multiple-strings.
(Bitbake rev: 8e6a893cb7f13ea14051fc40c6c9baf41aa47fee)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we've already fetched a particular URL then we do not need to do so
again within in the same operation. Maintain an internal list of fetched
URLs to avoid doing that.
(Bitbake rev: b4705c80add1f618c11a9223cdd9578d763b50ec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All logging messages are printed on stdout when processing
UI event queue. This makes it impossible to distinguish between
errors and normal bitbake output. Output to stderror or stdout
depending on log level should fix this.
(Bitbake rev: 56ac0d4c7a5f47aeb707b15a0c305d9f73aae945)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to avoid race condition when test if exists the linkfile
use bb.utils.lock, the best solution is to create a unique name
for the link file.
There is no way to create a unique linkfile name at this decorator
because is needed the machine and image variables, those variables
can't be passed easily in this code.
To avoid broke test export functionality use a try/except because bb
isn't available when use test export
[YOCTO #10225]
(From OE-Core rev: 059d475b6bce1e5414170a4fe2e7989f6b0eacd6)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python coverage versions lower than 4.x have problems with some distros. Adding the 4.x version as requirement to continue with coverage tracking.
[YOCTO #10207]
(From OE-Core rev: a378b817504986173c4b0984a28aead247589b3f)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are both referenced by
_create_devfs, therefore ensure that rootfs is rebuilt if changes
are made to either variable.
(From OE-Core rev: 06092cee0dc8c7cd2408ddfa9e9dc43fd9dfea2e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When 'git request-pull' fails it makes sense to remove output
directory. Otherwise create-pull-request will complain that
output directory already exists on the next run.
(From OE-Core rev: 8535784ba84060e0e7ca05e7771a58f9c70c69b9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The ${WORKDIR}/git refers to the source folder S which is different in
the case of an external source build.
(From OE-Core rev: fd4f4264a99cb0f8d20e3d87f66102d99cb5b6ad)
Signed-off-by: Christian Schuler <schuler.christian@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove patch maxsize.patch already applied upstream.
* Add patch Skip-empty-section-fixes-66.patch to prevent errors like:
/
|ERROR: go-cross-1.6.2-r0 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', '/home/user/src/prj/build/tmp/sysroots-uninative/
|x86_64-linux/lib/ld-linux-x86-64.so.2', '/home/user/src/prj/build/tmp/
|work/x86_64-linux/go-cross/1.6.2-r0/sstate-install-populate_sysroot/x86_64-
|linux/usr/bin/aarch64-prj-linux/go')'
|failed with exit code 1 and the following output:
|cannot find section .rela.dyn
\
* Add patch handle-read-only-files.patch to fix error when building
eSKD, the following error appears on task do_testsdkext
/
|ERROR: db-native-6.0.30-r1 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', 'src/fsl-community-bsp/build/tmp/work/qemuarm-poky-linux-
|gnueabi/core-image-minimal/1.0-r0/testsdkext/tc/tmp/sysroots-uninative/
|x86_64-linux/lib/ld-linux-x86-64.so.2', 'src/fsl-community-bsp/build/tmp/work/
|qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/testsdkext/tc/tmp/work/
|x86_64-linux/db-native/6.0.30-r1/sstate-install-populate_sysroot/x86_64-linux/
|usr/bin/db_tuner')' failed with exit code 1 and the following output:
|b'open: Permission denied\n
\
* Add patch Increase-maxSize-to-64MB.patch to fix error described
bellow, the same issue is discussed here:
- https://github.com/NixOS/patchelf/issues/47
/
|ERROR: qemu-native-2.5.0-r1 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', '../build/tmp/sysroots-uninative/x86_64-linux/lib/
|ld-linux-x86-64.so.2', '../build/tmp/work/x86_64-linux/qemu-native/2.5.0-r1/
|sstate-install-populate_sysroot/x86_64-linux/usr/bin/qemu-mips64')'
|failed with exit code 1 and the following output:
|warning: working around a Linux kernel bug by creating a hole of 36032512
|bytes in ‘../build/tmp/work/x86_64-linux/qemu-native/2.5.0-r1/
|sstate-install-populate_sysroot/x86_64-linux/usr/bin/qemu-mips64’
|maximum file size exceeded
\
(From OE-Core rev: 18efcbcb896239c64fedd009ce57f3f0c668cbc0)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building busybox, an occasional error was observed.
The error is consistently the same:
libbb/appletlib.c:164:13: error: 'NUM_APPLETS' undeclared (first use in this function)
while (i < NUM_APPLETS) {
The reason is the include file where NUM_APPLETS is defined is not yet generated (or is being modified)
at the time libbb/appletlib.c is compiled.
The attached patchset fixes the problem by assuring libb is compiled as the last directory.
[YOCTO#10116]
(From OE-Core rev: a866a05e2c7d090a77aa6e95339c93e3592703a6)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
support kernel 4.8
(From meta-yocto rev: a96837d7bc42b8710ca5ac687191f03540279fad)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have a proper fix now so we can remove the workaround.
This reverts commit 4d268abc2fc892c5d34449f78c8e9f2b1a9d6bac.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add patch to control building cunit-tests explicitly. Disable
them in the recipe.
Fixes [YOCTO #9849].
(From OE-Core rev: cd287235fc5b9d0c174a10a89e31ffd391806113)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the correct build system patch instead of adding linker flags
in recipe. Also update upstream status for the other build patch.
Fixes [YOCTO #9851].
(From OE-Core rev: cd67959c4794b132cb9fd20a2a37cf862e172bed)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There might be a race issue when multi runqemu processess are
running at the same time:
| Traceback (most recent call last):
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 920, in <module>
| ret = main()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 911, in main
| config.setup_network()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 760, in setup_network
| self.setup_tap()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 697, in setup_tap
| os.mkdir(lockdir)
| FileExistsError: [Errno 17] File exists: '/tmp/qemu-tap-locks'
(From OE-Core rev: ec33043477a0b915b0911f7d7eacb24361e4aaa8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use md5 sum instead of mtime as the "digest" method for rpm_sys channel.
The digest is used to determine if the channel has been updated. It was
found out that mtime was not a reliable digest. On some systems mtime
of the rpm db does not get updated after every transaction if transactions
(smart install / remove commands) are fired in quick succession. As a
consequence smartpm cache and rpm db get out of sync.
[YOCTO #10244]
(From OE-Core rev: e7267b4e78461e71a1175f93e2eb5e90272c2b47)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Indirect paths (e.g. ${TOPDIR}/../meta-something) do generally work if
used in BBLAYERS in bblayers.conf. However, if you built an extensible
SDK with this configuration then the creation of the workspace within
the SDK using devtool in do_populate_sdk_ext failed. This is because
the copy_buildsystem code was no longer correctly recognising that the
core layer ("meta") was part of a repository (e.g. openembedded-core /
poky) that should be shipped together - because of the indirection - and
thus it was splitting out the meta directory, and a number of places in
the code assume that the meta directory is next to the scripts
directory. Use os.path.abspath() to flatten out any indirections.
(From OE-Core rev: 7c0788cd2390fd0e1ec84bc9dbebcb67daee429f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After we run the build system within the eSDK internally as part of the
sstate filtering that happens during do_populate_sdk_ext, we need to
ensure that the TMPDIR created during that process gets deleted. However
we were using the TMPDIR path for the build producing the eSDK which may
not be the same (since that value would typically be filtered out) thus
if the user had set TMPDIR to something other than the default, the
temporary TMPDIR would not be deleted which not only led to extraneous
junk entering the SDK but also failures during install because the
TMPDIR path was different. In order to fix this, force TMPDIR to a known
value during the sstate filtering run so we know what to delete
afterwards.
Fixes [YOCTO #10210].
(From OE-Core rev: 038d9db66e69c9de12eb8581acb28a8facd726b6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building eudev from scratch in an sstate build results in configure errors
since the pkg-config macros can't be found. Add in a missing pkg-config
dependency using the appropriate class to avoid such failures.
(From OE-Core rev: 6b527bbfea5088c20da98cd72abe5caa4b399787)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently when you run builds from sstate, you can see warnings like:
WARNING: systemd-1_230+gitAUTOINC+3a74d4fc90-r0 do_configure: /data/poky-master/tmp-glibc/sstate-control/manifest-intel-corei7-64-glibc-initial.populate_sysroot not found
WARNING: systemd-1_230+gitAUTOINC+3a74d4fc90-r0 do_configure: /data/poky-master/tmp-glibc/sstate-control/manifest-intel-corei7-64-libgcc-initial.populate_sysroot not found
This is due to co_configure wanting to copy a limited number of m4 macros,
only listed in a recipes DEPENDS but that set is still larger than the set of
recipes which get restored from sstate.
For build determinism and to avoid these warnings, we need to make this
function match what the sstate code does. We really don't want to duplicate
the functionality since keeping things in sync would be hard so we create
a data structure which can be passed into the same underlying function,
setscene_depvalid().
[YOCTO #10030]
(From OE-Core rev: 37ffb1f7d812e40d6fa23b44782eaa8436d9ab76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various recipes depend on the kernel's do_shared_workdir
task, a quick grep suggests all external kernel modules
(via module.bbclass), but also perf, and potentially any
additional headers as outlined in linux-libc-headers.inc
are affected.
Having do_shared_workdir in SRCTREECOVEREDTASKS means this
task is removed when externalsrc is enabled, making all
those recipes fail as the task they depend on,
virtual/kernel:do_shared_workdir, doesn't exist.
Remove do_shared_workdir from SRCTREECOVEREDTASKS so that
all those recipes work even if externalsrc is activated.
According to the comment in here, the reason for
do_shared_workdir to be removed as a task is because it
modifies the source tree, but that doesn't seem to be
case.
(From OE-Core rev: 29e99d7a57803e450920600b5d35c5b4e58a0ede)
Signed-off-by: Andre Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the korg stable update
(From OE-Core rev: b9502470ec6413f85d76f88ebd121db9796985d2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the korg -stable release.
(From OE-Core rev: 85c9fbc70c99611ed8d6d4f23d3a31b4f6fd7e50)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: ed5ac04aa3bf10b9bf5047012d67a38f5ff89cef)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should reduce build times.
(From OE-Core rev: 74d9c5eb858bfe1dd16826b74be3af71bb1956d9)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When IMAGE_GEN_DEBUGFS is enabled, and IMAGE_FSTYPES_DEBUGFS is left
at its default (as suggested by local.conf.sample.extended),
recipe parsing fails:
bitbake kern-tools-native # or anything else for that matter
ERROR: <poky.git>/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'debugfs_vmdk' - possibly invalid type name or missing support class
ERROR: Failed to parse recipe: <poky.git>/meta/recipes-core/images/build-appliance-image_15.0.0.bb
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
i.e. bitbake doesn't even finish parsing...
Since IMAGE_FSTYPES_DEBUGFS is based on IMAGE_FSTYPES, and
since the build-appliance-image is setting IMAGE_FSTYPES
to vmdk, image.bbclass/image_types.bbclass will be trying
to build a debugfs_vmdk, causing the error, as this is not
implemented.
One solution to solving this problem could be as simple as
adding a line
IMAGE_FSTYPES_DEBUGFS_remove = "vmdk"
to the build-appliance-image recipe, but that is very
specific to the error encountered and carries the risk of
the error being reintroduced in another recipe.
Another solution could be to add 'debugfs_vmdk' to
IMAGE_TYPES_MASKED in image-vm.bbclass, but again, this
approach doesn't seem generic enough.
None of the live and vm type images have an implementation
for building a debugfs version, it doesn't seem to make
sense to build debugfs versions of any of them anyway, and
given IMAGE_TYPES_MASKED appears to be intended for those
image types exclusively, it seems the right approach is to
unconditionally also mask all debugfs_ flavours from
IMAGE_TYPES_MASKED to achieve a generic solution.
Do that so.
(From OE-Core rev: 9bd682c4f1c19d68c573c11822888ee799809272)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The debugfs is supposed to be used in addition to the
normal image for debugging purposes, it doesn't make
sense to artificially limit its maximum size.
(From OE-Core rev: 7cdf3b2444df8cd322d9eff1bdbdc5adddcaf22a)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For the hard float case, COMPATIBLE_HOST should be set to ".*-linux"
since OE can support multiple distro layers, not just poky.
(From OE-Core rev: ddcb08c6a8cb2187e98aa225b86777bb52c1d21e)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Peter Kjellerstedt
Patrick Williams
Saul Wold
Ross Burton
Markus Lehtonen
Hongxu Jia
Shan Hai
Paul Eggleton
Andre McCurdy
bavery
Mariano Lopez
Zubair Lutfullah Kakakhel
Richard Purdie
Ulf Magnusson
Ed Bartosh
Aníbal Limón
Humberto Ibarra
Christian Schuler
Fabio Berton
Juro Bystricky
Alejandro Hernandez
Jussi Kukkonen
Robert Yang
André Draszik
Bruce Ashfield
Alexander Kanavin