summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2018-11-14rng-tools: Fix crazy defaultsHongxu Jia
Since commit [f1dc9ac rng-tools: Fix crazy defaults] fixed init based on sysvinit, this fix rngd.service based on systemd. (From OE-Core rev: 078630b7bf8599ea2b3717ce33d2da0f7f26b0e2) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14testsdk: fix skipped testcase output "UNKNOWN" status while multiprocess ↵Hongxu Jia
execution Usually skipped testcase output "SKIPPED" [snip serial execution] |RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: SKIPPED (0.01s) |RESULTS - python.PythonTest.test_python3 - Testcase -1: SKIPPED (0.01s) [snip serial execution] But if enable multiprocess execution, skipped testcase output "UNKNOWN" status [snip enable multiprocess execution] |RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: UNKNOWN |RESULTS - python.PythonTest.test_python3 - Testcase -1: UNKNOWN [snip enable multiprocess execution] Here is my investigation: There is a class pairs TestProtocolClient and TestProtocolServer provided by python3-subunit. The TestProtocolClient generates a subunit stream of TestResult from a test run, and TestProtocolServer parses the stream of subunit TestResult. The class ProtocolTestCase is a unittest.TestCase adapter and it uses TestProtocolServer to parse the stream of subunit TestResult. In Yocto testsdk, it forks multiple processes to execute testcases and use TestProtocolClient to generate TestResult stream; and then it creates multiple threads to use ProtocolTestCase to parse stream of subunit TestResult through pipe; finally it passes multiple ProtocolTestCase as TestCase instance to main process and output status result. The problem point is TestProtocolServer parses `skip:' directive after reading a `test:' directive. Without `test:' directive, `skip:' directive will be ignored. All above requires SkipTest should be raised inside a test method rather than setUpClass method. Throwing SkipTest inside setUp works correctly (From OE-Core rev: 4828a88556d59e4d06933164c2ebeb9361b7450e) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libaio: Extend to nativePeter Kjellerstedt
lvm2 currently requires libaio. So building lvm2-native will result in the following error. ERROR: Required build target 'lvm2-native' has no buildable providers. Missing or unbuildable dependency chain was: ['lvm2-native', 'libaio-native'] Extend libaio to native to fix this issue. (From OE-Core rev: fe871d23c2714e66a1f5e2428a16e742ca40fc62) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libsm: extend to nativesdkMingli Yu
After enable tk via PACKAGECONFIG for python3, there comes below error: Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-testtools', 'nativesdk-python3-pbr', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-libxt', 'nativesdk-libsm'] Extend libsm to nativesdk to fix this issue. (From OE-Core rev: 5a527e381705ed8a3e2caba98205c8c8172a347a) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libice: extend to nativesdkMingli Yu
After enable tk via PACKAGECONFIG for python3, there comes below error: Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-git', 'nativesdk-python3-gitdb', 'nativesdk-python3-async', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-libxt', 'nativesdk-libsm', 'nativesdk-libice'] Extend libice to nativesdk to fix this issue. (From OE-Core rev: 46f39d402fbf5487d7a1036fbeec6726ba49334b) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14fontconfig: extend to nativesdkMingli Yu
After enable tk via PACKAGECONFIG for python3, there comes below error: Missing or unbuildable dependency chain was: ['nativesdk-packagegroup-sdk-host', 'nativesdk-opkg', 'nativesdk-libsolv', 'nativesdk-rpm', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-xft', 'nativesdk-fontconfig'] Extend fontconfig to nativesdk to fix this issue. (From OE-Core rev: f15120430914582f0889ddc442de1055e6c5dca9) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libxft: extend to nativesdkMingli Yu
After enable tk via PACKAGECONFIG for python3, there comes below error: Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-testtools', 'nativesdk-python3-pbr', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-xft'] Extend libxft to nativesdk to fix this issue as PROVIDES = "xft" in libxft recipe. (From OE-Core rev: 2709062a47b86bb86b2768f04f97f00af1bb9b47) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libxt: extend to nativesdkMingli Yu
After enable tk via PACKAGECONFIG for python3, there comes below error: Missing or unbuildable dependency chain was: ['buildtools-tarball', 'nativesdk-python3-pytz', 'nativesdk-python3', 'nativesdk-tk', 'nativesdk-libxt'] Extend libxt to nativesdk to fix this issue. (From OE-Core rev: 2ed08a6c467202504737040b83a8b9fd6481f62b) Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14testimage: Remove duplicate dependenciesRichard Purdie
(From OE-Core rev: 16d4368e7b85d5179374adb0a2d1ac215793e104) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14oeqa/runtime/utils/targetbuildproject: Use a subdir within ~/Richard Purdie
Without doing this, the code can and sometimes does try and do "rm ~/" which I think we'd all prefer it didn't. (From OE-Core rev: 9dc1de59330c366783ea043c68c1b59b1b49e707) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14oeqa/utils/buildproject: Only clean files if we've done somethingRichard Purdie
We should only be wiping out things on target if the tests have actually run. (From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14distcc: Handle upstream branch deletion for old releasesRichard Purdie
distcc upstream dropped the 3.2 branch which we reference in older project releases the revisions are there, just the branch is not. In order to be able to continue to build those old releases, adjust any mirror tarball to contain the missing branch. We have updated the newer point releases but the previous tags were failing to build. (From OE-Core rev: 5a1a322cfca2a514707eeb48f4c3dce5e4c1ad48) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14oeqa/manual/build-appliance: Drop test which is already automatedRichard Purdie
The nightly-build-appliance target already tests this particular build. (From OE-Core rev: 02c5f853f30568eb3f289c6b6fb5cacf712d15f7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14base.bbclass: Display name of licenses which caused SkipRecipeNathan Rossi
Display the name of the restricted licenses which caused the recipe to be skipped. This makes it easy to determine which license or licenses are missing and need to be checked and whitelisted. (From OE-Core rev: b71cd1ec45e247db688b784697829c1b485ca9ca) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14openssl-1.1.1: remove build path from version infoMartin Hundebøll
The openssl build system generates buildinf.h containing the full compiler command line used to compile objects. This breaks reproducibility, as the compile command is baked into libcrypto, where it is used when running `openssl version -f`. Add stripped build variables for the compiler and cflags lines, and use those when generating buildinfo.h. This is based on a similar patch for older openssl versions: https://patchwork.openembedded.org/patch/147229/ (From OE-Core rev: cbc9b743a711f07c04cf9f5b2fc3f83da6d28913) Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14cpan.bbclass: avoid newer MakeMaker run perl.realJens Rehsack
In newer versions of ExtUtils::MakeMaker, the location of the perl binary to run is determined differently which results in finding ${bindir}/perl.real instead of ${bindir}/perl (From OE-Core rev: 362bd36cbec052d2a37710498c901b699dcf5ca7) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14busybox: make busybox.links.{suid, nosuid} reproducibleMartin Hundebøll
The busybox.link.* files are generated from autoconf.h and applets.h, which are both auto-generated by the build system. The contents of the two files might be in different order, and so the link files are not reproducble as is. Fix this by sorting the lists using `sort`. (From OE-Core rev: e2450857d898238b0b719a5400e2340c65c80ada) Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14oeqa/runtime: Add tests for gstreamer CLIYeoh Ee Peng
We should not be finding GStreamer issues right around release time but that's what we seem to do. Port gstreamer tests from Intel Ref Kit. https://github.com/intel/intel-iot-refkit/blob/master/meta-iotqa/ lib/oeqa/runtime/multimedia/gstreamer/gstreamer_cli.py Add tests for gstreamer commandline tools (gst-inspect-1.0 & gst-launch-1.0). [YOCTO #11418] (From OE-Core rev: 3e77f845b517e3f4b3e7d09d088a9a80bf171653) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14scripts/autobuilder-worker-prereq-tests: Shore up qemu testingMichael Halstead
Check that yocto-autobuilder-helper has been cloned to the correct location. Check that vnc is running using the same script the autobuilder does. Set the DISPLAY enviroment variable to :1 the same way we do when building normally. Make the VM's serial console available so we can log in and power off allowing the tests to continue. (From OE-Core rev: 5fb26ff0b56eebb864fd8f74c015e414476eec43) Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14scripts/runqemu: Replace subprocess.run() for compatibiltyMichael Halstead
subprocess.run() was introduced in Python 3.5. We currently support down to Python 3.4 so I've replaced it with subprocess.check_call() which is available in that version. (From OE-Core rev: 3a09cee5994ce65079dab1042e47e5eed4540bb9) Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14scripts/runqemu: Add serialstdio modeRichard Purdie
Its currently not possible to have a console available whilst using qemu in graphics mode. This is causing some issues for testing autobuilder bringup so all a "serialstdio" mode to runqemu to accomodate this. The existing serialstdio internal variable is renamed to allow the new user visible option. (From OE-Core rev: 101b70d3c6a0a5a022d96dfdd21500b757c8fada) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14sqlite3_3: Update to 3.25.2Jens Rehsack
Update SQLite3 from 3.23.1 to 3.25.2 for UPSERT, window functions and improved ALTER TABLE support. For a detailed list of changes since 3.23.1, see * https://www.sqlite.org/releaselog/3_25_2.html * https://www.sqlite.org/releaselog/3_24_0.html (From OE-Core rev: eea7b16e762ab971d2ccea728e0019304325aed7) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14systemd-systemctl-native: handle Install wildcardsBrad Bishop
Handle the %i wildcard appearing in a dependency in the Install section of a template unit, e.g. $ cat foo@.service [Install] WantedBy=bar@%i.target Using the real systemctl something like: $ systemctl enable foo@baz.service will create a symlink in /etc/systemd/system/bar@baz.target.wants. Detect wildcards in templates and make the appropriate substitution. (From OE-Core rev: 22ed19292d160461042d4a2294fe2ec0b953873e) Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14pseudo: fix link with new sqlite3Ross Burton
If sqlite3 is built with FTS5 it uses log() from libm, but that linkage is lost if we manually statically link so explicitly link to libm. (From OE-Core rev: b24a67217d82f225e76fbc2dfb70dd8e1a6ea215) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14glide: disable ptest on mipsKai Kang
It fails to run task compile_ptest_base of glide on mips: | vet config not found The root cause is that go lang lacks '-buildmode=pie' support for mips. So disable glide ptest on mips for now. (From OE-Core rev: b8a1a5a5d8fe376e9015b0406881bcee0658f1a0) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14rootfs: ensure that packages in IMAGE_INSTALL_DEBUGFS are existingAndrej Valek
Ensure that additional packages in IMAGE_INSTALL_DEBUGFS are available before installation. (From OE-Core rev: 06a1bbea67a7233deff80ebe3681b4e0cca6817a) Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14metadata_scm: Drop orphaned monotone functionsRichard Purdie
Its been 'a while' since we used monotone, drop these revision function remnants. (From OE-Core rev: f1c77ab87b3c16d14deff801f48292ed348da637) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14metadata_scm.bbclass: simplify base_detect_revision()Robert Yang
The previous code looks strange because of historical reason, simply return base_get_metadata_git_revision/branch() is enough, the later functions has handled everything like '<unknown>' and strip(). (From OE-Core rev: 8a6e70960e021e10a1d02e20e0519fdbdeac8616) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14shadow: improve reproducibility by hard-coding shell pathMartin Hundebøll
The shadow configure script tries really hard to detect the running shell to make sure it doesn't do unsupported calls. On my system the shell is detected as /bin/sh, while a build in an ubuntu docker it resolves to /bin/bash. And since the shell path is baked into the target binaries through config.h, the build becomes inreproducible. Fix reproducibility by hard-coding the shell to be /bin/sh (From OE-Core rev: 5e3e30446b6abd98d1d3e9bee818203a6a206634) Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14go 1.9/1.11: fix textrel qa warning for non mips archHongxu Jia
While building go itself, the go build system does not support to set `-buildmode=pie' from environment. Add GOBUILDMODE to support it which make PIE executables the default build mode, as PIE executables are required as of Yocto But mips doesn't support -buildmode=pie, so skip the QA checking for mips and its variants (From OE-Core rev: d11cb2ea0abfca4a5958ff4647f22a5b203113e5) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14pkgconfig: export variablesJoshua Watt
Export the PKG_CONFIG_PATH and PKG_CONFIG_LIBDIR variables in case the parent shell hasn't done so. (From OE-Core rev: 42f33bb5a480324b81c875fbb28872c734860253) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14ppce500v2: remove speChunrong Guo
*The PowerPC SPE support is split off to a separate powerpcspe port (From OE-Core rev: c67bc9bdcbcf46ed54dfbafd1bb6e405ed77f86a) Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14strace: Bump to version 4.25Mauno Niko
V4L2_CID_USER_IMX_BASE value differs in v4.14 and v4.19 LTS kernels https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/linux/v4l2-controls.h?h=v4.14.79#n191 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/linux/v4l2-controls.h?h=v4.19.1#n191 Building strace v4.24 against 4.19 kernel headers results in following build failure | arm-vaisala-linux-gnueabi-ranlib libstrace.a | In file included from ../strace-4.24/static_assert.h:31, | from ../strace-4.24/xlat/v4l2_pix_fmts.h:4, | from ../strace-4.24/v4l2.c:78: | ../strace-4.24/xlat/v4l2_control_id_bases.h:36:1: error: static assertion failed: "V4L2_CID_USER_IMX_BASE != (V4L2_CID_BASE + 0x1090)" This Linux kernel ABI breakage that occurred wrt V4L2_CID_USER_IMX_BASE has been observed and addressed in strace upstream commit https://github.com/strace/strace/commit/b89a69dec27cf638df0e17db80ed937c3e1abf77 Bump strace to version 4.25 which also addresses ABI breakage so that strace once again builds against both v4.14 and v4.19 LTS kernel headers (From OE-Core rev: facb6e2fd887d526e031b6c16b4bb8d385db952a) Signed-off-by: Niko Mauno <niko.mauno@vaisala.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14gpgme: 1.11.1 -> 1.12.0Hongxu Jia
Rebase 0007-qt-python-Add-variables-to-tests.patch Rework 0007-qt-python-Add-variables-to-tests.patch -> 0007-python-Add-variables-to-tests.patch Drop newly added option --disable-lang-qt-test which is merged to --disable-gpg-test by upstream commit [26820ba qt: Respect --disable-gpg-test for tests] (From OE-Core rev: 9457163b2c4982a64814c6b38c292d7bc61ff643) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14man-db: 2.8.3 -> 2.8.4Hongxu Jia
(From OE-Core rev: b630168f54e8414faad12710bc10133cff9e5857) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14ncurses: upgrade 6.1 -> 6.1+20180714Hongxu Jia
(From OE-Core rev: c1d824c3bd3ff8651df0083a47e4cedbaa180831) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14gnupg: upgrade 2.2.9 -> 2.2.10Hongxu Jia
(From OE-Core rev: 5efe9eb79ac325f55fc52f67b522afaf7ebb847a) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14apr: upgrade 1.6.3 -> 1.6.5Hongxu Jia
(From OE-Core rev: a9c90d3d97c928dad4bd9137bff957877bb57a3c) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14xf86-video-intel: update to latestAnuj Mittal
For changes, please see: https://cgit.freedesktop.org/xorg/driver/xf86-video-intel/log/?qt=range&q=e4fe79cf0d9a05ee3f3a027148ef0aeb2b1b34e1...0932a6b37ba6d5c9e916a1cb6ab89c3205b81a0c Enable sna by default and remove upstreamed patches. Also include a patch from fedora to fix compile issues when using qemux86 which doesn't enable sse2 leading to gcc refusing to inline vertex_emit_2s in emit_vertex because they are defined as: static __attribute__((always_inline)) void vertex_emit_2s(struct sna *sna, int16_t x, int16_t y) __attribute__((target("sse2,fpmath=sse"))) __attribute__((always_inline)) static void emit_vertex(/* omitted */) leading to errors like: | In file included from ../../../git/src/sna/gen4_vertex.c:34: | ../../../git/src/sna/gen4_vertex.c: In function 'emit_vertex': | ../../../git/src/sna/sna_render_inline.h:40:26: error: inlining failed in call to always_inline 'vertex_emit_2s': target specific option mismatch | static force_inline void vertex_emit_2s(struct sna *sna, int16_t x, int16_t y) | ^~~~~~~~~~~~~~ | ../../../git/src/sna/gen4_vertex.c:308:25: note: called from here | #define OUT_VERTEX(x,y) vertex_emit_2s(sna, x,y) /* XXX assert(!too_large(x, y)); */ | ^~~~~~~~~~~~~~~~~~~~~~~~ | ../../../git/src/sna/gen4_vertex.c:360:2: note: in expansion of macro 'OUT_VERTEX' | OUT_VERTEX(dstX, dstY); | ^~~~~~~~~~ (From OE-Core rev: a181b36bf2357c5f7d5835df2f828ff1e0007dc6) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14connman: update to 1.36Olekandr Kravchuk
- updated connman to v1.36 - removed mainstreamed patches - includes.patch has been rabased and transformed into git format (From OE-Core rev: 85b76e52d2060e197435606eb6316c8833b46361) Signed-off-by: Oleksandr Kravchuk <dev@sashko.rv.ua> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14xserver-xorg: update to 1.20.3Armin Kuster
1.20.3 fixes arm booting in testimage (From OE-Core rev: 7d96e1659b1616f287805abb42f512fa17c0c493) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14kernel: use olddefconfig as the primary target for KERNEL_CONFIG_COMMANDBruce Ashfield
As was warned by commit 312ee68752fa [kconfig: announce removal of oldnoconfig if used], oldnoconfig has been removed from the 4.20 kernel. So we switch our default mode to olddefconfig. commit fb16d8912 [kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias] introduced olddefconfig in the 3.10 kernel, we shuffle oldnoconfig to the fallback target. The fallback mode allows kernels between 3.10 and the currently listed oldest kernel of 3.2 to continue to configure. (From OE-Core rev: 8593dcb7e8c938530ff00ffedf7f3d02d26c3bad) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14bind: update to latest LTS 9.11.5Armin Kuster
includes: CVE-2018-5738 drop patch for CVE-2018-5740 now included in update see: https://ftp.isc.org/isc/bind9/9.11.5/RELEASE-NOTES-bind-9.11.5.html Add RECIPE_NO_UPDATE_REASON for lts (From OE-Core rev: bf1be2e0b1484ca8a91eabbd8b89663eacccf4a9) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14dhcp: fix issue with new bind changesArmin Kuster
(From OE-Core rev: 5775e9ef2fce1d0b9860602f1065bb1e09bc1b61) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14xf86-input-libinput: update to 0.28.1Armin Kuster
(From OE-Core rev: ec251cdc481d2e088ed817e651bacdf213fb9ded) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14xkeyboard-config: update to 2.25Armin Kuster
(From OE-Core rev: ff129d24dbd83768c221aa522bd32031fdbc2071) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libxcb: update to 1.13.1Armin Kuster
(From OE-Core rev: c3ecf470b0f4d681dd11c366e3fa903c6e13717e) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libx11: update to 1.6.7 and sytle cleanupArmin Kuster
refresh Fix-hanging-issue-in-_XReply.patch (From OE-Core rev: 7edcf4f5b54ae713ede600f6c43ae955320efe69) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14libsm: update to 1.2.3Armin Kuster
reoder things per style (From OE-Core rev: 4e22f40647014dbd9eb05f0a9becd90fd903e7b1) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-14openssh: Update to 7.9 primarily bug fixesArmin Kuster
see: https://lwn.net/Articles/768991/ (From OE-Core rev: d9b69aa41bc0b768698b132b9805a8abf0fac40d) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-03 01:25:58 +0000