Age | Commit message (Collapse) | Author |
|
When one of the layer details tests fails (as it occasionally
does, if running on a machine under heavy load, due to sync issues),
the error message shown is misleading, as it is something like:
"Expected 'This was imported' in ['This was imported', ...]"
The string 'This was imported' is in the list shown in the message,
but the message suggests it isn't.
This is because the test compares the string with one list, but
then uses a different list in the fail message if the comparison
fails.
Fix the list shown in the message about the test failing.
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Add tests for the state transitions in the "most recent builds"
area of the all builds page.
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Test that the build dashboard only shows a menu and a build
summary area if a build has properly "started" (i.e. has at least
one Variable object associated with it).
[YOCTO #8443]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
When a build fails, it shouldn't have links on its build time in the
recent builds area or in the all builds table.
[YOCTO #8443]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Remove the side bar and build details modules for failed builds.
[YOCTO #8443]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Add a property to the Build model which records whether
the BuildStarted event has occurred for the build.
The proxy for this event is the presence of variables recorded
against the Build: as the buildinfohelper only saves variables
when the BuildStarted event occurs (as the variables aren't
available on the bitbake server before that point), we can
tell whether BuildStarted has happened by counting Variable
objects on the Build.
This can then be used to determine whether a Build "properly"
started, enabling a different dashboard display (left-hand menu
hidden) if the build didn't record any useful information (e.g.
if it had a bad target).
[YOCTO #8443]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Failed builds don't have any time data recorded for them,
so the time field in the builds table, the time shown
in the recent builds area, and the build time shown in
the build dashboard should not be links for failed builds.
[YOCTO #8443]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Help icons need to have the Bootstrap tooltip() method called on
them so that the popups are correctly styled.
Ensure that the colour of the help/error/warning icons is correct,
depending on the build state.
Fix pluralisation of errors and warnings shown.
Add a div around the build state area so it's easy to pick up
where the state is going to display (e.g. in tests).
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
To prevent showing a "0% of tasks complete" message for a long time,
don't show the progress bar until the first task has finished.
While waiting for that first task, show a message about tasks
starting instead.
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Modify buildinfohelper and toasterui so that they record the
recipe parse progress (from ParseProgress events in bitbake)
on the Build object.
Note that because the Build object is now created at the
point when ParseStarted occurs, it is necessary to set the
build name to the empty string initially (hence the migration).
The build name can be set when the build properly starts,
i.e. at the BuildStarted event.
Then use this additional data to determine whether a Build
is in a "Parsing" state, and report this in the JSON API.
This enables the most recent builds area to show the recipe
parse progress.
Add additional logic to update the progress bar if the progress
for a build object changes.
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
The most recent builds area of the all builds and project builds
table needs to update as a build progresses. It also needs
additional functionality to show other states (e.g. recipe parsing,
queued) which again needs to update on the client side.
Rather than add to the existing mix of server-side templating
with client-side DOM updating, translate all of the server-side
templates to client-side ones (jsrender), and add logic which
updates the most recent builds area as the state of a build changes.
Add a JSON API for mostrecentbuilds, which returns the state of
all "recent" builds. Fetch this via Ajax from the build dashboard
(rather than fetching the ad hoc API as in the previous version).
Then, as new states for builds are fetched via Ajax, determine
whether the build state has changed completely, or whether the progress
has just updated. If the state completely changed, re-render the
template on the client side for that build. If only the progress
changed, just update the progress bar. (NB this fixes the
task progress bar so it works for the project builds and all builds
pages.)
In cases where the builds table needs to update as the result of
a build finishing, reload the whole page.
This work highlighted a variety of other issues, such as
build requests not being able to change state as necessary. This
was one part of the cause of the "cancelling build..." state
being fragile and disappearing entirely when the page refreshed.
The cancelling state now persists between page reloads, as the
logic for determining whether a build is cancelling is now on
the Build object itself.
Note that jsrender is redistributed as part of Toaster, so
a note was added to LICENSE to that effect.
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
In situations where a bitbake run fails before the build
properly starts and BuildStarted is fired, a UI has no way
to get at the targets passed to the build. This makes it
difficult for the UI to report on the targets which failed.
Fire a BuildInit event before running buildTargets() or
buildFile(). This enables a UI to capture targets passed to
buildTargets(), even if the build fails (e.g. the targets
themselves are invalid).
[YOCTO #8440]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
(Bitbake rev: f77e6f21a2cc57a3fcb5970437e55cfae39849a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The link to the Chromedriver downloads page is dead, so
put in the correct URL.
(Bitbake rev: f0e6832bc33df2bb1b2f4b7f436ffbf023e24b13)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For the latest Firefox versions, WebDriver requires a download of a
separate binary and an additional capability to be defined on it.
Modify our tests so that when "marionette" is set as the browser,
this capability is defined on the Firefox driver. Also add a note to the
README about the additional installation steps required.
(Bitbake rev: f6011d986f9a573a39e7b98af0aefe6cc88461ad)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If using OE's externalsrc with a source tree that is not tracked by git
and contains broken symlinks, you can receive "TypeError: unorderable
types: NoneType() < str()" within the file checksum code due to:
checksums.sort(key=operator.itemgetter(1))
Don't add files with no checksum to the checksums list in order to avoid
this.
(Bitbake rev: 484fe5a3f5b840e5422cbdff0eef9aecfe944a19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If better_exec() throws a subprocess.CalledProcessError then show the output to
the user as it likely contains useful information for solving the problem.
(Bitbake rev: 8a6424ed871c3cbacd21cae8bc801197f83d67a6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While switching from master to krogoth build with a common download directory,
got a large number of warnings like the one listed below:
WARNING: freetype-2.6.3-r0 do_fetch: Couldn't load checksums from
donestamp /home/maxin/downloads/freetype-2.6.3.tar.bz2.done: ValueError
(msg: unsupported pickle protocol: 4)
These warnings are caused by the difference in pickle module
implementation in python3(master) and python2(krogoth). Python2 supports
3 different protocols (0, 1, 2) and pickle.HIGHEST_PROTOCOL is 2 where as
Python3 supports 5 different protocols (0, 1, 2, 3, 4) and
pickle.HIGHEST_PROTOCOL is obviously 4.
My suggestion is to use 2 since it is backward compatible with python2
(all the supported distros for krogoth provides python2 which supports
pickle protocol version 2)
(Bitbake rev: cc67800f279fb211ee3bb4ea7009fdbb82973b02)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the removal of uclibc from OE-Core, this is no longer needed.
(From meta-yocto rev: c02a10b40c5bb80cf82e85b90965206c954a77c1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will only
contain releases that are currently in Debian, so currently doesn't contain
1.18.7 as unstable has moved on to 1.18.9.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org instead,
and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking
continues to work.
(From OE-Core rev: b32d430c3c7dccf3a8d06ab492d648893a05950f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since this recipe doesn't use a SCM the SRCREV is unneeded (and
inaccurate).
(From OE-Core rev: 7635748f9bf2de75e94222ff286b9d02e85b2dfe)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe uses some convoluted methods to ensure the build is using the right
flags but they don't appear to be needed anymore.
No need to prepend HOST_CC_ARCH/TOOLCHAIN_OPTIONS via CFLAGS as the Makefile
picks up CC from the environment and that includes these options.
No need to append the default CFLAGS as their special options are actually in
CPPFLAGS.
(From OE-Core rev: 2230e5f7bf7e6dc747ada74477d5a72905d8d80b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a comment to the recipe listing license files that were found but
not able to be identified, so that the user can find and examine them
by hand fairly easily.
Fixes [YOCTO #9882].
(From OE-Core rev: 4b7d1bf8172533e9ac91a49ade152a05e2ee4146)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you supplied an empty file to patch_recipe() (or an empty list to
patch_recipe_lines()) then the result was IndexError because the code
checking to see if it needed to add an extra line of padding didn't
check to see if there were in fact any lines before trying to access the
last line.
Fixes [YOCTO #9972].
(From OE-Core rev: 92a73e870478ddb2a2d137e3fff28828809bec2e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I got fed up with seeing items dance around in sstate-package-sizes.txt
in the buildhistory git repo simply because they have the same size.
Let's sort the list first by size and then also by name to ensure items
with the same size are deterministically sorted.
(From OE-Core rev: 7340c1ea677731d21351d47d935d9de7d7e2eda5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add SDK_INCLUDE_PKGDATA and SDK_INCLUDE_TOOLCHAIN to the variables that
we put into sdk-info.txt
(From OE-Core rev: 4bf5be6a1fc39f367bbb59e1787cb55e7b5835ae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SDK_EXT_TYPE is set to "full" then we really ought to be shipping
everything that is expected to be in the SDK, and that includes gdb
(it's already referred to by the environment setup script if nothing
else). This is implemented by using the SDK_INCLUDE_TOOLCHAIN
functionality I just added, since the only material thing that adds on
top of a full SDK is gdb and we should always have the rest of it in a
full SDK anyway.
Fixes [YOCTO #9850].
(From OE-Core rev: 9872dcc25c5cdfb99bda197db08476085f8c7ecc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new oe-check-sstate to filter the sstate artifacts shipped with
the extensible SDK by effectively running bitbake within the produced
eSDK and and getting it to tell us which tasks it will restore from
sstate. This has several benefits:
1) We drop the *-initial artifacts from the minimal + toolchain eSDK.
This still leaves us with a reasonably large SDK for this
configuration, however it does pave the way for future reductions
since we are actually filtering by what will be expected to be there
on install rather than hoping that whatever cuts we make will match.
2) We verify bitbake's basic operation within the eSDK, i.e. that
we haven't messed up the configuration
3) We verify that the sstate artifacts we expect to be present are
present (at least in the sstate cache for the build producing the
eSDK). Outside deletion of sstate artifacts has been a problem up to
now, and this should at least catch that earlier i.e. during the
build rather than when someone tries to install the eSDK.
This does add a couple of minutes to the do_populate_sdk_ext time, but
it seems like the most appropriate way to handle this.
Should mostly address [YOCTO #9083] and [YOCTO #9626].
(From OE-Core rev: 4b7b48fcb9b39fccf8222650c2608325df2a4507)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a script to check which sstate artifacts would be installed by
building a given target - by default this is done with a separate
TMPDIR to ensure we get the "from scratch" result. The script produces a
list of tasks that will be restored from the sstate cache. This can also
be combined with BB_SETSCENE_ENFORCE* to check if sstate artifacts are
available.
The implementation is a little crude - we're running bitbake -n and
looking at the output. In future when we have the ability to execute
tasks from tinfoil-based scripts we can look at rewriting that part of
it to use that instead.
(From OE-Core rev: 4d059e02099e6244765027f2771192434764c606)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we're to completely replace the standard SDK with the extensible SDK,
we need to be able to provide the standard toolchain on install without
doing anything other than installing it, so that you can install the SDK
and then point your IDE at it. This is particularly applicable to the
minimal SDK which normally installs nothing by default.
NOTE: enabling this option currently adds ~280MB to the size of the
minimal eSDK installer. If we need to reduce this further we would have
to look at adjusting the dependencies and/or the sstate_depvalid()
function in sstate.bbclass which eliminates dependencies, or look at
reducing the size of the artifacts themselves.
Implements [YOCTO #9751].
(From OE-Core rev: ed0d8ed72370df694f720cc13897493478dc1de9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a meta-recipe to bring the toolchain into the extensible SDK. This
was modelled on meta-ide-support but some adjustments were needed to the
dependency validation function in sstate.bbclass to ensure that all of
the toolchain gets installed into the sysroot. With this, after
installing a minimal eSDK you only need to run the following after
sourcing the environment setup script to get the toolchain:
devtool sdk-install meta-extsdk-toolchain
Addresses [YOCTO #9257].
(From OE-Core rev: 8110806b1b5534ae830a4fdd1a5293c86a712d0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't absolutely need this - it doesn't change the default
behaviour, but it seems to me we have a convention to set default values
so we should add one here.
(From OE-Core rev: 4c734df1df3c19b0dabb9da5b4dc86b966a0d71c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 6eb6fde2567a2692afccb7ee0546b2c992c168aa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using a directory in the layer as the GPG home and carefully deleting
the right files from it, use tempfile to create a temporary directory which will
be cleaned up for us.
Also change the public/secret key variables to be absolute paths as they're
always used as absolute paths.
(From OE-Core rev: d4a5b5d11c6d7d5aba5f2eb88db091c1b98ef87c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not set default values of KDUMP_CMDLINE and KDUMP_KIMAGE, and leave
them set by configure file since they are different for different
architectures. Take KDUMP_KIMAGE kdump kernel image for example:
x86 is bzImage
mips64 is vmlinux
ppc is uImage
arm is zImage
(From OE-Core rev: 05dcb054fcd0c80bb09612c3e15b6b1f0487aae8)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1.2.7 -> 1.3.0
(From OE-Core rev: acff48731ea19c11768fed076d696fd1cb0bbbf0)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
5.40 -> 5.41
(From OE-Core rev: 633e73fb780da76e5025483310c3ca7eb5f78a26)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Take the dash compatible IPv6 link-local address test from the Debian
version of dhclient-script.
Note that although "echo -e" in the OE version of dhclient-script is
technically bash specific too, it is supported by Busybox echo when
Busybox is configured with CONFIG_FEATURE_FANCY_ECHO enabled (which
is the default in the OE Busybox defconfig) therefore leave as-is.
(From OE-Core rev: acd7b33d136fac52e1da7ce1bb3edd2a938b1b6f)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrate the commit from https://github.com/ecki/net-tools/commit/a70c568b907d23ec2cf7defc81be50c351968f12
to fix a bug which causes the 'netstat -a' to print "[UNKNOWN]" in case of
DNS problem instead of IPv6 address.
(From OE-Core rev: e99a7220bbc2d605200d5005ba40bf45f6f8dcf5)
Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #9991]
(From OE-Core rev: 0d69b3bf6cdeee866642529b6269391146333a43)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the floating dependency on polkit by providing a PACKAGECONFIG
option. Then, package the newly created files appropriately.
[YOCTO #9987]
(From OE-Core rev: a1ecd168b092a0cc7322431913fd1f42cfa9a37e)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake rev 67a7b8b02 "build: don't use $B as the default cwd for
functions" (included in current bitbake master) breaks the assumption
that do_bundle_initramfs runs inside the build directory.
This causes kernel_do_compile() as called from within
do_bundle_initramfs() to fail, as the former is not being executed
from the correct directory anymore. (Note that kernel_do_compile()
as called from bitbake directly doesn't suffer from that problem,
as it inherits the workdir from base_do_compile() in that case.)
Set workdir explicitly.
(From OE-Core rev: 4455da22a151c2ac006af63cbd39779b21b12580)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The replace() method of the python string class doesn't replace
in-place, then the var KERNEL_IMAGETYPE_FOR_MAKE doesn't be updated as
design.
(From OE-Core rev: 392fc3cd276d5029314c7158245bc65dd82279cd)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
musl contains hand-written assembly which is not compatible with
the MIPS16e mode.
(From OE-Core rev: dbbd58cb64b12cb4dc816425eee59c56cd46301f)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tar's --no-recursion flag only applies to files mentioned after the
flag, which made it a no-op in this invocation of tar, because it was at
the end of the command line.
This is simple to verify with GNU tar 1.29:
| $ mkdir foo
| $ mkdir foo/dir
| $ touch foo/dir/file
| $ tar -cf - foo --no-recursion | tar t
| foo/
| foo/dir/
| foo/dir/file
| $ tar -cf - --no-recursion foo | tar t
| foo/
Modify the code so that it actually does what the comment says by moving
the flag in front of the --files-from argument.
(From OE-Core rev: d45f5e71fef5ffbd4408f69c5c179dc71a3eb452)
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes
[YOCTO #9772]
(From OE-Core rev: f96da00e78999899ea7037ebc9547a87023e309a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
clang cross compiler fails to detect gold linker from
cross-binutils, instead it defaults to ld.gold from build
host, lets disable using gold when clang is active to avoid
this issue
(From OE-Core rev: 2a535deb4e080f464db1ffc40dfc53235fa13874)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only check that ${S} actually exists if there was something in ${SRC_URI} to
fetch, the argument being that if SRC_URI is empty the the recipe won't be using
${S} at all.
In general recipes that have no sources can remove the unpack task, but
expecting all recipes to do this relatively advanced operation isn't realistic.
(From OE-Core rev: 8cba511ab6ea557fab9f7838dfe1fc8284bbdd68)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
oe.utils.getstatusoutput() is a wrapper for subprocess.getstatusoutput() which
uses Universal Newlines, so the output is a str() not bytes().
(From OE-Core rev: ce24d4c3632b71939ad198268a900ee823a89b27)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RPMv5 has removed support for _RPMVSF_NOSIGNATURES,
the flag can be replaced with a flags set:
"RPMVSF_NODSAHEADER|RPMVSF_NORSAHEADER|RPMVSF_NODSA
RPMVSF_NORSA"
(From OE-Core rev: 5c0c1b8a64643ad7130b17b5dfce9cecffa6d962)
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|