summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2019-01-04local.conf.sample: make systemd as default init managerkangkai/systemdKai Kang
Move configurations from local.conf.sample.extended to local.conf.sample to make systemd as default init manager for poky. [YOCTO #13031] Signed-off-by: Kai Kang <kai.kang@windriver.com>
2019-01-04wic: update test case test_qemuKai Kang
It checks output of mount in wic test case test_qemu. But the outputs are different between sysvinit and systemd. Add assertion for systemd. Signed-off-by: Kai Kang <kai.kang@windriver.com>
2018-12-27mega-manual: Updates to support BitBake User ManualScott Rifenbark
Fixes [YOCTO #12399] Fixes made to have the BitBake User Manual included in the build of the mega-manual. I placed this manual at the end of the mega-manual. Following changes made: * Makefile - Modified to include two PNG files. All PNG files in a given manual are listed in the area that makes the mega-manual so that the tarfile is complete. * mega-manual.xml - Updated the front wording to tell the user that the BitBake User Manual is included in the Mega-Manual. Also, added a last section to actually include the bitbake-title.png file and the *.xml files. Note that I could not add the title figure from the same figures folder of the local "bitbake" folder. Would not include in the build. So, I pulled the file from the figures folder of the mega-manual, which is what I do for all the other book titles used in the mega-manual. * mega-manual.sed - Modified to clean out the old stuff that had been carried along for older books not supported for the release. Modified to include link processing for the newly included BitBake User Manual. * New Figures - Moved copies of the "bb_multiconfig_files.png" and "bitbake-title.png" figures into the figures folder of the mega-manual. (From yocto-docs rev: 78a1ae0ca92bb7f8a9d3a32a320299371d0ed361) Signed-off-by: Scott Rifenbark <srifenbark@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27ref-manual, overview-manual: Fixed BitBake User Manual linksScott Rifenbark
Some occurrences of links to the BitBake User Manual were using a target (i.e. &YOCTO_DOCS_BB_URL;#bitbake-user-manual). Using this form causes the mega-manual.sed file to not process the link correctly for the mega-manual. These are subtle errors and have probably existed for some time. I removed the target ID to fix the problem. (From yocto-docs rev: 701f61fd80e5103ee02efbe5eed9a8607ac9a336) Signed-off-by: Scott Rifenbark <srifenbark@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27testimage.bbclass: remove boot parameter systemd.log_targetKai Kang
Boot parameter systemd.log_target=console affects command journalctl's output and causes oe selftest case test_systemd_boot_time fail to pass. | Error at obtaining the boot time from journalctl | RESULTS: | RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s) systemd.log_target=console was introduced by oe-core commit a0bb649 and work with parameter systemd.log_level to enable systemd debug. systemd.log_level has been removed already, so remove systemd.log_target too to make case test_systemd_boot_time pass. (From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27binutils: Upgrade to latest on 2.31 release branchKhem Raj
* Append minor version to PV so recipe checker is happy * Drop upstreamed patches * Remove changelog from CVE patches, they dont apply and are in patch log anyway (From OE-Core rev: 550085bc092d773c8c481e238d0d3210466166dc) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27ffmpeg: Backport patch to fix build with gcc9Khem Raj
(From OE-Core rev: 545b58b9169aad38ad6c180b1fa690f878d6781a) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27valgrind: Fix x86_64 build failure with gcc9Khem Raj
(From OE-Core rev: d6fd2a4a0fb437c4752091edefd080efe5399ea9) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27gdb: Backport a fix to build with gcc9Khem Raj
(From OE-Core rev: 389d956bdacee92125c0112a58991516b866a39b) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27libxcrypt: Upgrade to 4.4.2Khem Raj
Licence-Update: Copyright Alexander Peslyak; 0-clause BSD added see https://github.com/besser82/libxcrypt/commit/e07290ec7c3de301ce2b813ee2b42131bef2b119 Rename recipe to ve versionless and add PV in recipe itself, makes it easy to traverse git history Drop upstreamed patch (From OE-Core rev: 2eae2d53df739acc2f89599a9296ccacbafebb60) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27musl: Update to latest masterKhem Raj
* sync APIs from kernel v4.18 * Misc bug fixes Full logs https://git.musl-libc.org/cgit/musl/log/?qt=range&q=39ef612aa193cc6e954ac5a01574300ccd4b7ef9..21a172dd36cae7a08492fd3a7500d7bf0daee13e (From OE-Core rev: 7e1bb5822fc71bd040739aa0c6c6f3f3c5a1f60a) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27nfs-utils: Disable format-overflow as WerrorKhem Raj
These warnings are intricate and we can ignore that for now as they are being found by gcc 9, eventually this should be not needed when code upstream is fixed (From OE-Core rev: 42176d26e5c893e86ab5d8a2e5b8a3d021e03a69) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27gnupg: Do not apply -Woverride-init guard for gcc >= 9Khem Raj
(From OE-Core rev: ee23aa985f72932330b6cbee3693611d98ee325a) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27gnupg: Upgrade to 2.2.12 releaseKhem Raj
(From OE-Core rev: af3e1bbcc615adfc1f915448afe9c794ad938522) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27grub2: Fix passing null to printf formatsKhem Raj
Backport a patch that helps with this error which is found by gcc9 (From OE-Core rev: 93419fb569b827056a422614d3dc29cd41b2b6bb) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27package_ip.bbclass: add xz threadingAlejandro del Castillo
Before, threading was enabled via a patch to opkg-build. Now that opkg-build provides a hook for extra arguments, use that. (From OE-Core rev: b288f4e825a036b9cc15b27301d264fe695dba65) Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27opkg-utils: upgrade to version 0.4.0Alejandro del Castillo
Drop patches already merged upstream. (From OE-Core rev: 19ac60adbfc9c3ea1896e7e0d83f3b33438c092b) Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27opkg: upgrade to version 0.4.0Alejandro del Castillo
- Drop 0001-remove_maintainer_scripts-use-strict-matching.patch (From OE-Core rev: 74d3b4a199bfeae99dfbe6f23f1c3cb4bf76abff) Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27oeqa/utils/qemurunner: Print output when failed to loginRobert Yang
This is useful for debugging. (From OE-Core rev: da527d73f5eeae0f29b5f99aab757491d3f87ec7) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-27bitbake: bitbake-user-manual: Created unique tags for glossary variables.Scott Rifenbark
Fixes [YOCTO #12399] The bug was to get the BitBake User Manual into the YP Mega-manual. All the changes here create unique tags used with variables in the BitBake Manual. Prior to the fix, tags were identical between like variables in the YP reference manual and the BitBake User Manual. The reason for this is because when I created the BitBake manual's glossary, it was a cut-and-paste operation to get the bulk of the work started. At the time, the BitBake User Manual was not a part of the Mega-manual. Once we decided to include the BitBake User Manual as part of the Mega-Manual, building the mega-manual produced warnings for all these duplicate links. To fix, I have updated the variable tags in the BitBake User Manual to use the following form: 'var-bb-<variable_name>' The tags used in the YP ref-manual follow this form (original): 'var-<variable_name>' (Bitbake rev: fb6de2057aae3fbdf37f007d2e47794b332020e1) Signed-off-by: Scott Rifenbark <srifenbark@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26glibc: Enable --with-default-linkKhem Raj
This lets linker to use its internal linker script for shared objects Fixes with when gold is default linker (From OE-Core rev: 7bbc453ac2b8d63680855789948a145fc448017f) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26base.bbclass, classextend.py: Drop catering to gcc-initialKhem Raj
(From OE-Core rev: 5d0307fbefbc8e6667edfa93d527166059a30100) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26tcmode-default: Drop pinnings for gcc-initial based recipesKhem Raj
(From OE-Core rev: 5b2fd1c72407d3024512982685d8b1227c2631af) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26musl: Move away from gcc-initial dependencyKhem Raj
gcc-initial step is no more needed (From OE-Core rev: fa47e2e65488dd03f94b1fefdeeb09f5e4a26373) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26libssp: Remove dependency on gcc-initialKhem Raj
Its not needed anymore and it can depend on gcc-cross instead (From OE-Core rev: 9dc6fcd492d41d6a65a8f5ab562830ba9372937a) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26newlib: Move away from gcc-initial dependencyKhem Raj
gcc-initial step is no more needed (From OE-Core rev: 44539118ce29ba4fa916ab28ebf66e6fd5819738) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26recipes: Drop virtual/libc-for-gccRichard Purdie
We no longer have special "libc" for gcc so we can rely on plain virtual/libc and reduce the complexity in the dependencies. (From OE-Core rev: 122217b421f749b5fef52bea44ad6e04bc8f8d3a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26gcc: Drop the -initial versions of the compilerRichard Purdie
Separated out from the previous commit for clarity, this simply drops all the -inital pieces of gcc which are no longer needed after the previous commit. (From OE-Core rev: d84971928b68efddbdb6344b1021d998c9e26adb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26gcc: Drop gcc-cross-initial and use gcc-cross insteadRichard Purdie
We need a libgcc to build glibc. Tranditionally we therefore build a non-threaded and non-shared compiler (gcc-cross-initial), then use that to build libgcc-initial which is used to build glibc which we can then build gcc-cross and libgcc against. Firstly, we can drop the glibc dependency from gcc-cross, *if* we make two changes: a) specify the minimum glibc version to support in a configure option b) create a dummy limits.h file so that later when glibc creates one, the headers structure has support for it. We can do this with a simple empty file Once gcc-cross is libc independent, we can use it to build both libgcc-initial and then later libgcc. libgcc-initial is tricky as we need to imitate the non-threaded and non-shared case. We can do that by hacking the threading mode back to "single" even if gcc reports "posix" and disable libc presence for the libgcc-intial build. We have to create the dummy limits.h to avoid compiler errors from a missing header. glibc will fail to link with libgcc-initial due to a missing "exception handler" capable libgcc (libgcc_eh.a). Since we know glibc doesn't need any exception handler, we can safely symlink to libgcc.a. With those changes, gcc-cross can be used in all places and we only need one build of gcc for each architecture. For some reason ifunc was being disabled on mips prior to these changes but afterwards became enabled but caused assertion failures. This is therefore disabled until we can debug that. (From OE-Core rev: 62b7308b8c4d2b439a15a4f7cbc6f823077bb0be) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26glibc: Remove site_config and glibc-initialRichard Purdie
The only reason we appear to need glibc-initial at this time is to support the site_config code. The site_config code compiles and therefore needs at least some level of working C library to link against. This isn't a good reason to keep the complexity of glibc-initial around so remove it, and the site_config support which then breaks. Performance benchmarks suggest the time spent just rerunning configure for site_config just about equals any performance benefit for OE-Core image builds excluding the time spent adding glibc-initial to the dependency chain. I'm not opposed to readding some other form of site_config support but it needs to be rethought. (From OE-Core rev: c5df105e7583e43da9b682f739bebaf873dcd2f4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26crosssdk/cross-canadian: Set LIBCOVERRIDE correctlyRichard Purdie
(From OE-Core rev: 94bece16c23c9ec8850fd497aea37e6a265da30a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26oeqa/concurrencytest: fix for locating meta-selftestRobert Yang
The previous code assumed builddir and meta-selftest are in the same dir, but this isn't always true, builddir can be anywhere, use get_test_layer() to locate meta-selftest can fix the problem. (From OE-Core rev: 56d2493a9adfcc47ae7e265439e05ff42cdbbbbf) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26bitbake: process: Rewrite multiple connection handlingRichard Purdie
If the bitbake server recieved multiple connections, it currently closes ones it can't handle (while its dealing with another). This is rather antisocial behaviour which causes clients to quickly run through their retries and abort. Instead, queue any other connections until the current one is closed. This way the client can decide when it wants to stop waiting for the server. If the client is gone by the time we handle it, we handle that gracefully. This also fixes a number of bugs in the connection handling where connections which did drop early were badly handled causing tracebacks in the logs. Also, handle queue incomming connections in a loop to ensure that the main client handling doesn't starve that piece of the system. This code was stress tested by running 50 connection attempts in parallel at once, ensuring the code correctly handled them. (Bitbake rev: 02845a561b38658ac3edf5cc9c34625ed860d34f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26bitbake: process: Handle EWOULDBLOCK in socket connectRichard Purdie
Now that we set a timeout for the socket, it can return EWOULDBLOCK if a signal or other event happens to wake up even if we don't timeout. If this happens, retry the connection, else we simply see it quickly loop through the retries and abort the connection in a very short interval. (Bitbake rev: d5b0a9a302ac0eafa4f797ac15ea77db87e82b3c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26bitbake: main: When retrying the connection, show the attempt numberRichard Purdie
The current bitbake output makes it hard to know which retry is being attempted. Add this information to the output to make it clearer. (Bitbake rev: 0774e6e03d27adb7aca6fa9c47ab6ad426c937de) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26bitbake: process.py: Set socket timeout to 10 secondsRichard Purdie
The current value of 2 seconds has shown to be short in wider testing. (Bitbake rev: 8a1f2fcf35d61d83bbafa8fa3ae215fd5f51728b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-26bitbake: tests/persist_data: Add testsJoshua Watt
Adds a test suite for testing the persistent data cache [YOCTO #13030] (Bitbake rev: 96a4155049e834af17069d981cc2215e50d18c1a) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20populate_sdk_ext.bbclass: Include site.conf in parsing for contents for ↵Khem Raj
local.conf Some distros use site.conf to emit certain variables which are important for eSDK e.g. DISTRO with out which eSDK will not be able to ger right metadata when it tries to build (From OE-Core rev: 95659bed3f6f3216b346f70cfc9ffae9788c0fc1) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20i2c-tools: upgrade 4.0 -> 4.1Anuj Mittal
* For changes, see: https://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git/log/?qt=range&q=v4.0...v4.1 * Remove upstreamed patches (From OE-Core rev: 085530e8fff016d7cadcae4a769a82cddf9e6695) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20common-licenses: update Libpng license textAnuj Mittal
The new libpng license comprises the terms and conditions from the zlib license, and the disclaimer from the Boost license. The legacy libpng license license, used until libpng-1.6.35, is appended to the new license, following the precedent established in the Python Software Foundation License version 2. See for details: https://sourceforge.net/projects/libpng/files/libpng16/1.6.36/ (From OE-Core rev: 673c2dcf1045f7264570f81e2880d7a03befd2af) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20libpng: upgrade 1.6.35 -> 1.6.36Anuj Mittal
For changes, see: https://sourceforge.net/p/libpng/code/ci/libpng16/tree/CHANGES License-Update: Added authors to license, formatting, version changes, export classification clarification and a new libpng2 license with clarification: The new libpng license comprises the terms and conditions from the zlib license, and the disclaimer from the Boost license. The legacy libpng license license, used until libpng-1.6.35, is appended to the new license, following the precedent established in the Python Software Foundation License version 2. (From OE-Core rev: 099aecfaa3baf6b24c2b751da92d7d2fa0266bf9) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20harfbuzz: upgrade 2.1.3 -> 2.2.0Anuj Mittal
For changes, see: https://cgit.freedesktop.org/harfbuzz/tree/NEWS?h=2.2.0 Remove do_configure_append after the patch to remove pkg.m4 was merged upstream. (From OE-Core rev: 6574bb752335ce48b873d17b24496bfb669bfefe) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20sqlite3: upgrade 3.25.3 -> 3.26.0Anuj Mittal
For changes, see: https://www.sqlite.org/releaselog/3_26_0.html (From OE-Core rev: 8286e9d79dde1c951e92ac1c55bbf0b9798d9dbf) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20libatomic-ops: upgrade 7.6.6 -> 7.6.8Anuj Mittal
For changes, see: https://github.com/ivmai/libatomic_ops/compare/v7.6.6...v7.6.8 Also switch to using tarball release instead. (From OE-Core rev: a33170ff9a7abc5689e266e093069fd716c62622) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20gsettings-desktop-schemas: upgrade 3.28.0 -> 3.28.1Anuj Mittal
Changes from release notes: - Set default background image for screen lock to an existing one - Translation updates (From OE-Core rev: 6a10ff0bcd6e00660a419ca535239af55e30d5aa) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20eudev: upgrade 3.2.5 -> 3.2.7Anuj Mittal
For changes, see: https://github.com/gentoo/eudev/compare/v3.2.5...v3.2.7 (From OE-Core rev: dd2c4d9d85e70abacfa70fbe9281f393452875ea) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20icecc: patchelf is needed by icecc-create-envDouglas Royds
Although we could potentially build patchelf and all its dependencies, they would all have to be blacklisted to avoid trying to build them with icecc. We use the host patchelf instead. (From OE-Core rev: 0860216a81092fba084d29696db6d0c65a226c85) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20icecc: Don't generate recipe-sysroot symlinks at recipe-parsing timeDouglas Royds
The python function icecc_path() was being invoked inline by set_icecc_env(), meaning that it was being invoked at recipe-parsing time. As a side-effect, icecc_path() was creating the recipe-sysroot directory and symlinking icecc into it. Because this was done at parsing time (rather than configure time), we were generating otherwise-empty WORKDIRs for *all* parsed recipes, and for all virtual classes (-native, -nativesdk). In my build, this generated more than 800 of these otherwise-empty WORKDIRs. I have simplified icecc_path() to return only the intended path to the icecc symlinks in the recipe-sysroot, with no side-effect. We then create the directory and the icecc symlinks at configure time. Because get_cross_kernel_cc() is still invoked at parse-time, it needs a guard-clause for the non-kernel case. We are now finding the host icecc at do_configure time, so icecc needs to be in the HOSTTOOLS. I have made this non-fatal, so that we can still inherit icecc without icecc installed. (From OE-Core rev: d2fcaeb153fdc3f8d7143ea823139f1537055ff1) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20icecc: Syntax error meant that we weren't waiting for tarball generationDouglas Royds
If two bitbake processes try to generate the ICECC_VERSION tarball at the same time, the thread that fails to get the lock will wait 30 sec for the first to finish. A syntax error meant that this was not happening, and in particular, if tarball generation failed (eg. for lack of patchelf), it did so silently. (From OE-Core rev: 4455c46bf7f49c2b44f250aa89b63b342368e2e3) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-20icecc: Trivial simplificationDouglas Royds
(From OE-Core rev: fa6bae80bc3392bf99ce53bbe19a0e05dbd0c4ee) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-20 10:59:22 +0000