| Age | Commit message (Collapse) | Author |
|---|
|
Fixes [YOCTO #9984]
Added more detail to the examples that show the effects of
variable expanison.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
This reverts commit 6f6cd0674fd1595f4e74b7da692e0c348b2660c6 as it was
a duplicated commit.
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The link to the Chromedriver downloads page is dead, so
put in the correct URL.
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For the latest Firefox versions, WebDriver requires a download of a
separate binary and an additional capability to be defined on it.
Modify our tests so that when "marionette" is set as the browser,
this capability is defined on the Firefox driver. Also add a note to the
README about the additional installation steps required.
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If using OE's externalsrc with a source tree that is not tracked by git
and contains broken symlinks, you can receive "TypeError: unorderable
types: NoneType() < str()" within the file checksum code due to:
checksums.sort(key=operator.itemgetter(1))
Don't add files with no checksum to the checksums list in order to avoid
this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If better_exec() throws a subprocess.CalledProcessError then show the output to
the user as it likely contains useful information for solving the problem.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While switching from master to krogoth build with a common download directory,
got a large number of warnings like the one listed below:
WARNING: freetype-2.6.3-r0 do_fetch: Couldn't load checksums from
donestamp /home/maxin/downloads/freetype-2.6.3.tar.bz2.done: ValueError
(msg: unsupported pickle protocol: 4)
These warnings are caused by the difference in pickle module
implementation in python3(master) and python2(krogoth). Python2 supports
3 different protocols (0, 1, 2) and pickle.HIGHEST_PROTOCOL is 2 where as
Python3 supports 5 different protocols (0, 1, 2, 3, 4) and
pickle.HIGHEST_PROTOCOL is obviously 4.
My suggestion is to use 2 since it is backward compatible with python2
(all the supported distros for krogoth provides python2 which supports
pickle protocol version 2)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's possible that the logging FIFO doesn't do a complete read (or the sender a
complete write) with the result that an incomplete message is read in bitbake.
This used to result in silently truncated lines but since 42d727 now also
results in a warning as the start of the rest of the message isn't a valid
logging command.
Solve this by storing incoming bytes in a bytearray() across reads, and parsing
complete messages from that.
[ YOCTO #9999 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add tests for the tasks and recipes sub-pages of the build
dashboard.
[YOCTO #9833]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
None of the columns in the built recipes table are marked
as not hideable, so it is possible to remove all the columns
and make the table disappear.
Set the recipe name and version columns as not hideable.
Also rename the "Name" column to "Recipe", for consistency with
the design and with other recipe tables.
[YOCTO #9833]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The task, recipe and order columns in the build tasks table
should not be hideable. If they are, it's possible for the
table to have all of its columns hidden so that it no longer
displays.
Set the hideable property to prevent these columns from being
hidden.
[YOCTO #9833]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The task display template formatting had split the Django
url template tag across two lines and broken it. This resulted
in a gibberish URL for task logs.
Fix by placing the tag and its arguments on a single line.
[YOCTO #9837]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Mario Domenech Goulart <mario.goulart@bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Partially add back a revised version of the layersource handling so that
we can continue to support the old toasterconf.json and it's setup of
the local project.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the migration didn't get the release conversion right for say, a
local or imported layer it would be handy to be able to edit this
in the django admin page.
Also useful for developers to be able to tweak layers on the fly.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need to keep track of layerindex data in our database. And
using branch==release is very confusing in the schema. Instead use the
existing Release definition to keep track of which release a
layer_version is for.
Remove the Branch model and all references to it.
Create a migration path to convert from up_branches to their
corresponding releases.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds basic progress % information and provides better description of
what is happening.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove and replace layersource model references in the tests and test
data. Remove the orm/test as this only tested LayerSource interactions
which have now been removed.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace references to the now deprecated layersource models across
Toaster with the new enums for layer source types.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move and refactor the layerindex layer source update mechanism so that
we don't have to track the layerindex objects in the toaster database.
Move this out of the orm and into the management command.
Paves the way for future improvement to allow you to specify a layer
index server as an argument to the command.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We had a lot of complexity around different layer sources to allow for
multiple sources and different priorities for these source. This was
implemented using rigged abstract classes which represented the
different layer sources when in fact just an enum/flag on the
layer_version object is sufficient for our needs.
Remove the LayerSourcePriority object as this is not needed. We no longer
have a problem of multiple layers coming from multiple sources so this
is not needed. Two migrations are added to first remove the child models
which represented layersources. Then a second migration is needed to
remove the LayerSource model it's self as Django can't understand the
non-standard base class dependency. Triggering this issue:
https://docs.djangoproject.com/en/1.8/topics/migrations/#dependencies
Clean up a number of flake8 warnings in classes which were modified.
[YOCTO #9853]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the LayerSource admin from django admin interface. LayerSources
are not going to be manageable from the admin interface.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need to configure layer sources in the initial configuration as
this information is provided by the models.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In MultiStageProgressReporter, set a guard when we start the progress
so that it can't happen more than once. This fixes "Initialising
tasks.." being shown twice in succession when running bitbake in
non-interactive terminal mode.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It turns out that progress information we can extract from a task is
rarely apportioned closely enough to the time taken for the ETA to be
accurate, so showing it is going to be misleading most of the time for
anything but the most basic of examples. Let's just remove it and avoid
misleading (or worse, annoying) the user.
Fixes [YOCTO #9986].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify custom widgets then we don't want to assume where the
"extra" position is - you should have to specify it, and if it isn't
specified it shouldn't just wipe out the last widget or you can start to
see odd behaviour if you're modifying the code.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using a PREMIRROR with plain (non-unpack) files, a SRC_URI like
SRC_URI = "file://devmem2.c"
will cause devmem2.c to be a symlink in the WORKDIR pointing to the
local PREMIRROR.
Trying to apply a patch on this file will either modify the file on
the PREMIRROR or will fail due to sanity checks:
ERROR: devmem2-1.0-r7 do_patch: Command Error: 'quilt --quiltrc /cache/build-ubuntu/sysroots/x86_64-oe-linux/etc/quiltrc push' exited with 1 Output:
Applying patch devmem2-fixups-2.patch
File devmem2.c is not a regular file -- refusing to patch
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For some reason the data written in this way is coming back out the
files out of order. I've not been able to simplify the test case to a
point where this was standalone reproducible. Simplify the code and
write out the cache files sequentially since this seems to avoid the
errors and makes the code more readable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've seen cache corruption where the pairs come out in a different
order to the way we saved them for unknown reasons. Add better sanity
checking to give a more user friendly error rather than a crash/traceback.
Also allows the system to reparse and recover.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since we no longer have random data like version fields in these structures
and we can assume any extra cache data subclasses our class, simplify the
code.
This is mostly reindenting after removal of the pointless type checks.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Firstly, don't store the versions fields in memory in the cache objects
data store. This just complicates the code for no good reason.
Secondly, write the version fields to all cache files, not just the
core one. This makes everything consistent and easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If an "extras" cache file is corrupted, the system would not notice
and later fail with errors about missing entries. Add a test for this
which means we can fall back to re-parsing in those cases.
[YOCTO #9902]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise you can look at the log and wonder why parsing isn't happening
when it really is due to other code paths.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Idle timeout can be specified either by -T/--idle-timeout option or
by sessing BBTIMEOUT environment variable. Bitbake xmlrpc server
will unload itself when timeout exprired, i.e. when server is idle
for more than <idle timeout> seconds.
[YOCTO #5534]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This option makes bitbake xmlrpc server to run in foreground.
It should be useful for debugging purposes.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Needed a section on executing a list of task and recipe combinations.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a minor tweak to the third paragraph to be more inclusive
of the topic.
Fixes [YOCTO #9970]
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
In the BBDEBUG variable description, the "-d" parameter needed to
be "-D". Fixed it.
Fixes [YOCTO #9950]
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #9909]
Added some technical clarifications to the existing note to be clear
about what is causing the limitations in this case. Applied some
formatting fixed to for the use of the include word.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Applied formatting to a "after" word that should be
<filename>after</filename>. Also added a new clarifying paragraph in
the "Recursive Dependencies" section.
Fixes [YOCTO #9861]
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Added a new Perforce Fetcher section in the same spirit as the existing
sections for other supported fetchers. Changes included the new section,
removal of the bulleted item that mentioned this fetcher as an
"additional" fetcher, and the creation of a new variable in the glossary
named P4DIR.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #9909]
Added a note that talks about how the BBCLASSEXTEND mechanism
adds recipe variants.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #9861]
In the "Dependencies internal to the .bb File" section, I placed a
note providing more detail on how recipes are built regarding task
dependency.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #9861]
I updated the section on dependencies to give a couple of examples
for task dependencies within a single recipe and dependencies for
tasks between two individual recipes.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
There is no default.
Fixes [YOCTO #9683]
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Needed a section on executing a list of task and recipe combinations.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
In the runqueue cleanup/conversion, "dep" was mistakenly used where "tid" should
be leading to incorrect task-depends.dot files and causing general confusion.
Fix this, its clearly incorrect looking at the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to reuse the Selenium helper outside a Django
environment (for functional testing), add a new module
containing the base class SeleniumTestCaseBase, which only
inherits unittest.TestCase
Add a class SeleniumTestCase with multiple inheritance of
StaticLiveServerTestCase and SeleniumTestCaseBase to prevent
existing tests from breaking.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If environment variable BBSERVER == 'autostart' bitbake will
automatically load server if it's not running yet.
If host and port are in bitbake.lock then bitbake tries to check
if server is running and responses to commands and starts new
server only if this check fails.
[YOCTO #5534]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Scott Rifenbark
Richard Purdie
Elliot Smith
Paul Eggleton
Ross Burton
Maxin B. John
Mario Domenech Goulart
Michael Wood
Enrico Scholz
Ed Bartosh
Andrew Bradford
Aníbal Limón