Age | Commit message (Collapse) | Author |
|
Provide more information in the case the sources are not found in the
unpack step.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A user friendly error is throw when neither the clonedir nor
fullshallow exist. Without the check, a difficult to interpret error
is throw from within the fetch command.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For better readability and future use, we extract the function which
ensures that a given symlink exists.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
shallow tarball
The mapping of the URLs to the local shallow tarballs is not obvious. For
easier understanding, we add this tests to explicitly showing the mapping.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The mapping of the URLs to the local tarballs is not obvious. For easier
understanding, we add this tests to explicitly showing the mapping.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
directories
The mapping of the URLs to the local directory is not obvious. For easier
understanding, we add this tests to explicitly showing the mapping.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recent changes broke SRCPV and workaround was introduced
to avoid circular dependency if SRCPV is in PV.
However there is still the same error if SRCPV is in PR.
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Searching in the task explorer requires one to focus the task list. A
readily visible and focused search bar makes searching intuitive.
Signed-off-by: Tobias Olausson <tol@hms.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the list_obj function, we can't check if the requested object is 'in',
the index data -- as it's actually an attribute of the object. Move to hasattr.
The remaining items were incorrect usages of 'type' for class type comparison.
Instead move to 'isinstance'. Remaing 'type' comparisons are still valid. The
code was also reordered slightly to avoid a lot of:
if not isinstance(x, y):
...
else:
...
reordering it removes the not and makes the code slightly easier to read.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The "buildimport.py" script is missing the "import shutil" line,
which causes a project import page failure.
[YOCTO #12959]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The version of django in the 2.6 release got bumped to 1.11.14.
The toaster requirements file needs to be updated to accept it.
[YOCTO #12958]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The distro source path link is missing "conf/distro/", and the
display is using the machine link instead of the distro link.
[YOCTO #12957]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have some slightly odd behaviours with the current implementation of
_remove operations. For example:
TEST = " A B"
TEST_remove = "C"
would trigger TEST to become "A B" even thought it doesn't contain "C".
In particular, this means that an inactive remove operator added in a
bbappend could change the task checksum which is not desireable.
Fix the operation to preserve whitespace, adding new tests to make this
explict and test further corner cases. Also update the manual to match.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently when a variable is renamed, all the variable history is lost.
This makes it hard for users to understand/debug where values came from.
Improve the code so that history is preserved across renamed variables.
(Expanded variable key names are a special case of variable renaming)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The environment was being cleared before the UI imports occurred which
caused problems for graphical UIs like taskexp. The full environment was
intended to be available to UI clients and it was only meant to be cleared
for the server/cooker, so tweak the code order so this is the case.
This fixes problems reported for taskexp.
[YOCTO #12670]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some repositories may specify a relative submodule path. If this happens,
it is our responsibility to use the parents URL (ud) and handle any relative
processing ourselves.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The new fetcher did not run 'git submodule update' recursively.
Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The new gitsm fetcher assumed that submodules were living directly in
the 'modules' directory, whereas they can be arbitrarily nested inside
subdirectories.
Solve it by first creating the parent of the destination directory for
the symlink and copy steps.
Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When creating custom image recipes, the layer add for new layers
needs missing xhrLayerUrl data. Also, code is needed to check
and inform user if the newly added layer has not been cloned yet,
and provide helpful error message instead of the current frozen
dialog.
[YOCTO #12887]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster users behind firewalls that block "git" access usually
require developers to add remap rules in their "~/.gitconfig"
to remap GIT accesses to HTTP* access. However, there is a
"git remote" test in Toaster that is not aware of such remaps,
resulting in a false error.
For now, disable this nice-to-have check to support this release,
and re-enable when we can add remapping accommodations for this
test.
[YOCTO #12944]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster needs to include new YP-2.6 "Thud" release.
[YOCTO #12943]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The method 'store_log_event' in 'buildinfohelper.py' always puts log
messages from CLI builds into the backlog but never takes them out.
The "close" method now forces all backlogged CLI events to be registered.
[YOCTO #12813]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
'qbareclone' in place of 'bareclone'
Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
unpacked
The shallow_tarball check is never true due a check on the caller side.
The tarball check is not related to the code on the caller side.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To improve the readability we extract the different scenarios of why
the clonedir needs an update.
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Created a new section to show how to handle dependencies when
you are doing a multiple configuration build. Put it in the
"Examples" section.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
The BBMULTICONFIG variable is a variable used for BitBake and was
not documented in the BitBake Manual glossary. I added the
definition. I also added the variable to the example in the section
describing how to execute builds for multiple configurations.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Created a new example. Also added a figure for the separate
configuration file hierarchy
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
GitLab returns a redirect from /foo to /foo.git which older releases of Git
don't handle when cloning. These tests don't clone so the redirect works, but
let's be consistant with the structure of these URLs and add the .git suffix.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The prior fetcher did not know how to work with MIRRORS, and did not
honor BB_NO_NETWORK and similar.
The new fetcher approach recursively calls 'gitsm' download on each
submodule detected. This ensures that it will go throug the
standard download process.
Each downloaded submodule is then 'attached' to the original download in
the 'modules' directory. This mimics the behavior of:
git submodule init
but there is no chance it will contact the network without permission.
It then corrects upstream reference URIs.
The unpack steps simply copies the items from the downloads to the destdir.
Once copied the submodules are connected and we then run:
git submodule update
According to the git documentation, git submodule init can and will modify
the project configuration and may connect to the network. Doing the
work manually prevents this. (This manual process is allowed based
on my reading of the documentation.)
See: https://git-scm.com/book/en/v2/Git-Tools-Submodules
The small change to the existing test is due to this new code always assuming
the code is from a remote system, and not a 'local' repository. If this
assumption proves to be incorrect -- code will need to be added to deal
with local repositories without an upstream URI.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change the way the network related tests are skipped, based on how the
fetch tests are handled. We introduce a 'skipIfNoNetwork()' function that
will report skipped tests through the standard unit test reporting system.
[YOCTO #12928]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test case was changing the current directory, but was never restoring it
to the original location. This causes occasional failures in later test cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test case needs to access test case files. Different versions of python
may return absolute or relative locations in __file__. Use the same approach
as other test cases in determining the location of the test files.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A nasty corner case leads to a hang when utils.lockfile is called from
oe-core's package-manager:deploy_dir_lock (in turn called from
rootfs:_create further up the call stack) with "name" owned by root
and the user running bitbake has no write access.
Because this code runs under pseudo, the UID and EUID of the bitbake
worker process are 0, so the os.access(dirname, os.W_OK) returns True
i.e. it thinks the path is writable when in fact it's not writable.
Only later when trying to open the file an Exception it thrown because
the OS prohibits writing, but the Exception is ignored and the open is
retried leading to an infinite loop.
So this fix is to not ignore the "Permission Denied" exception.
An alternative fix would be to replace the os.access() call with an
try: open() except() at the beginning of the function.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
At the end of bitbake selftest we see:
sys:1: ResourceWarning: unclosed file <_io.TextIOWrapper name='/dev/null' mode='r+' encoding='UTF-8'>
Clean up the /dev/null handling to drop the unused entry in build.by and
ensure the other open() calls are cleaned up.
NULL was unused since http://git.yoctoproject.org/cgit.cgi/poky/commit/bitbake/lib/bb/build.py?id=4a081b5a52e3d27da8d4b062f3fda292e8d8fb0a
back in 2012.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the warning:
WARNING: lib/bb/data_smart.py:235: DeprecationWarning: generator 'COWDictMeta.iter' raised StopIteration
for k, v in self.variables.iteritems():
by using return from the generator, not raising StopIteration.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running "bitbake gconf-native -c cleansstate; bitbake core-image-sato:do_populate_sdk"
results in a build where it fails to find gconf-native and fails to build it,
merrily trying to build the SDK without gconf being present.
The issue is the missing setscene tasks are effectively ignored as the later
code in runqueue thinks that since other sstate tasks are present, these
'cover' the missing one. In reality we need to call BB_SETSCENE_DEPVALID
to make that decision. To do that we need a "reduced" setscene dependency
graph which we don't have in main task graph context.
Since that was already done in setscene, we should just assume anything
in the non-covered list needs to be built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user puts universe on the commandline, they don't really want warnings
so use the new verbnote level instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It has become apparant we need a log level which reaches the console but
isn't a warning/error. Add "verbnote" as a way of doing this, behaves as
a note but with a higher priority.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were various problems in the server startup loggin:
a) stdout/stderr were not being flushed before forking which could potentially
duplicate output
b) there were separate buffers for stdout/stderr leading to confusing logs
where the entries could be reordered. This was particularly confusing
due to the separator the logs use to idendify new messages
c) an fd wasn't being closed during server startup meaning if the
server failed to start, the closed fd wasn't detected as it was held
open by the other reference
d) If the pipe was detected as being closed, the code incorrectly retried
server startup
e) The event code would remap stdout/stderr without flushing them, leading
to lose log messages
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the case of a sublayer of an existing layer, where the sublayer and
main layer share a path, the system may not match the paths properly resulting
in:
No bb files matched BBFILE_PATTERN_sublayer '^/path/main/sublayer'
because it has already matched the main layer.
Fix this issue by sorting the collection items based on the pattern, using
longest to shortest. Obviously regex wildcards could still be an issue
but these are typically not used, so this simply fix should work in the
existing cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before this fix it is assumed that the removal of the
remote can only fail because there is not remote to remove. This
is a false assumption. Example error which would be ignored:
git -c core.fsyncobjectfiles=0 remote rm origin failed with exit code 1, output:
Note: A branch outside the refs/remotes/ hierarchy was not removed;
to delete it, use:
git branch -d master
error: could not lock config file config
error: Could not remove config section 'remote.origin'
Due to the masking of this error a stranger error will be
presented to the user, because this time we do not mask the
exception:
git -c core.fsyncobjectfiles=0 remote add --mirror=fetch origin https://github.com/ptsneves/tl-wn722.git failed with exit code 128, output:
fatal: remote origin already exists.
The most likely reason that the remote cannot be removed nor
modified is that the DL_DIR/git2 does not have permissions
compatible with the user running bitbake.
This commit fixes:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=12728
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable the ability to select an existing build directory into Toaster.
This opens to the user the backend features of 12823, for command line
user compatibility.
Enable the ability to select saving Toaster settings in the regular
"bblayers.conf" and "local.conf" instead of the default
"toaster_bblayers.conf" and "toaster.conf". This opens to the user the
backend features of 12821, for command line user compatibility.
[YOCTO #12902]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The local layer info (provided through custom fixtures) should
not be hidden. It is better to handle it in the same manner
as an imported layer, otherwise the layer path and dependency
info is not shown. The layer editing fields are handled in the
html side of things appropriately so this does not harm that
implementation.
[YOCTO #12891]
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a case where the layer source is local only and the recipe
is not yet built, we can search for the path with layer's
local_source_dir, and if available that should be used rather
than just skipping the scenario.
[YOCTO #12891]
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change allows the CUSTOM_XML_ONLY toaster setting to be
provided through the environment so the user can do this without
mingling with the settings.xml, for scenarios where modifying
settings.xml is not achievable.
[YOCTO #12891]
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|