summaryrefslogtreecommitdiffstats
path: root/meta/conf
AgeCommit message (Collapse)Author
7 hoursfmt: Add it from meta-oe for ccache 4.10Robert Yang
It is required by ccache 4.10, from cmake/Dependencies.cmake: find_package(Fmt 8.0.0 MODULE REQUIRED) (From OE-Core rev: 473b80caab466538557796c188554ea1dc0a0480) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
35 hoursxcb-util-errors: add recipeMarkus Volk
This adds xcb-errors which is an optional dependency for wlroots (From OE-Core rev: 2cbe7abefbb8bdf4881012555661f57d3b90d587) Signed-off-by: Markus Volk <f_l_k@t-online.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
5 daysmaintainers.inc: update self e-mail addressMichael Opdenacker
(From OE-Core rev: 0d4a435141c71710e479b7f49c38aba9f57cd1d7) Signed-off-by: Michael Opdenacker <michael@opdenacker.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
8 daysqemu: upgrade 8.2.1 -> 9.0.0Martin Hundebøll
Remove pacthes accepted upstream, and refresh the remaining ones. Remove patches required by ubuntu 18.04, as those are unmaintainable. Remove CVE status for CVEs not applicable to the new version. RP: Remove the hppa-firmware{,64}.img files as they cause strip failures and SDK relocation errors. We don't support PARISC anyway, if anyone needs them they can write the changes needed. (From OE-Core rev: ca2ae68aad88d77cde0670467c4966dbb98d05c0) Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
12 dayslinux-libc-headers: bump to v6.9Bruce Ashfield
(From OE-Core rev: 78dac2c1f037921c58ccc6efcbf540a92d0fcfcf) Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
14 dayslibomxil: remove the recipeAlexander Kanavin
Now-removed gstreamer omx plugin was the only consumer, and it's all very obsolete and hasn't seen development in years. (From OE-Core rev: 63535ce55141e7d4184a1f19efc3f49946f506ae) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
14 daysgstreamer1.0: update 1.22.11 -> 1.24.3Alexander Kanavin
Drop gstreamer1.0-omx recipe as upstream has removed it: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4976 kate plugin dropped from bad. amrnb/amrwb moved from ugly to good. (From OE-Core rev: 9c21815339afb85f558d8a1e0365614320cdc7d7) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-28layer.conf: Add os-release to SIGGEN_EXCLUDERECIPES_ABISAFERichard Purdie
This rebuilds whenever DISTRO_VERSION changes (i.e. any commit is made) and systemd depends upon it so lots of things end up rebuilding which isn't necessary, (From OE-Core rev: 002a2a9d977ed5b86138333c567d25616d38c60b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-28pythonn3-rpds-py: enable ptestTim Orling
* Add RDEPENDS for ptest from tests/requirements.txt * Tests take ~14 seconds, so add to PTEST_FAST (From OE-Core rev: 6a1c551629defd3c241b30452496c580501dc781) Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-23maintainers.inc: maintainer for opensbiThomas Perrot
(From OE-Core rev: 3f5ed2e76f8fdf8c5aa35601f45b215820f79c5a) Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-23maintainers.inc: transfer some python recipes to tgamblinTrevor Gamblin
Change maintainer for the following recipes to tgamblin: python3-hypothesis python3-pygments python3-pytest python3-referencing python3-pyproject-metadata python3-setuptools-scm python3-sphinx (From OE-Core rev: 3eb971975a369a1b46070e4d063c0c8cfc0d3885) Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-23base/bitbake.conf: Move S/B to PSEUDO_IGNORE_PATHS unconditionallyRichard Purdie
Now S and B can't be set to WORKDIR, add to PSEUDO_IGNORE_PATHS unconditionally and simplify the code. (From OE-Core rev: 26cd2d56261827ad8d07e2145e95f82422accac2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-23usbinit: Drop recipeRichard Purdie
This recipe is poorly named, it is a gadget ethernet driver. Gadget ethernet is of questionable use now and usbinit isn't referenced/used anywhere within OE-Core. Drop it. (From OE-Core rev: 1ffd62b6198ba7967793f7fa3d5a31380c3d5d96) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-22base: Switch UNPACKDIR to a subdir of WORKDIRRichard Purdie
Change do_unpack to unpack files to a subdirectory of WORKDIR instead of WORKDIR itself. There are several good reasons for this but it is mainly about being able to isolate the output of the unpack task and tell the files apart from other things which are created in workdir (logs, sysroots, temp dirs and more). This means that when the do_unpack task reruns, we can clean UNPACKDIR and know we have a standard point to start builds from. It also makes code in tools like devtool and recipetool easier. To reduce the impact to users, if a subdirectory under UNPACKDIR matches the first subdirectory under WORKDIR of S, that directory is moved into position inside WORKDIR. This preserves the behaviour of S = "${WORKDIR}/git", S = "${WORKDIR}/${BPN}" and other commonly used source directory setups. The directory is moved since sadly many autotools based projects can't cope with symlinks in their paths. The patch also updates reproducible and SOURCE_DATE_EPOCH handling to match the new potential source locations. We can get rid of the horrible list of hardcoded directories in WORKDIR to ignore from that code. (From OE-Core rev: b84eec5c4cbf4b39d6712800dd0d2fe5337721cb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-22yocto-uninative: Update to 4.5 for gcc 14Michael Halstead
(From OE-Core rev: f5638681cef7e250ac64832dbe791418d97f05ba) Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-22tclibc-newlib: update security cflags overrideAlejandro Hernandez Samaniego
It appears that it is no longer necessary to disable security cflags for newlib targets, with the exception of RISCV architectures where the linker does not support PIE (From OE-Core rev: 94a3459c77ad48caab42ca816d984fe467042ce3) Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-21gcc: Upgrade to GCC 14.1 releaseKhem Raj
This is major release upgrade. major changes are listed in [1] and it has a list of bugs [2] fixed as well This release may differ in significant ways from prior gcc releases where it may require port the code to gcc 14, there is a porting guide [3] available. [1] https://gcc.gnu.org/gcc-14/changes.html [2] https://gcc.gnu.org/bugzilla/buglist.cgi?bug_status=RESOLVED&resolution=FIXED&target_milestone=14.0 [3] https://gcc.gnu.org/gcc-14/porting_to.html (From OE-Core rev: fc48aa30e91ffe94f1012fe108fb1db5233a0bc0) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-13glib/gobject-introspection: update 2.78.4 -> 2.80.0, 1.78.1 -> 1.80.0Alexander Kanavin
With these versions, which need to be updated in lockstep, upstream has relocated glib introspection data from g-i tree to glib tree and made its generation a part of the overall glib build. This creates a circular dependency, where g-i tools are linked with glib, but glib needs the tools to build its g-i data. (I don't know why the two source trees couldn't be simply merged into one, or g-i data for glib couldn't be generated inside g-i build against sysroot glib). Upstream is suggesting building glib twice, first without building g-i data, then building g-i and linking it with that version, then building the final glib, and that's what is being done here (via the new glib-initial recipe, which is sysroot-only, and is not pulled in via indirect dependencies either). Other glib changes: 0001-Do-not-write-bindir-into-pkg-config-files.patch restores writing bindir variable into glib.pc file (meson only writes it out if other variables depend on it, and this custom patch removes that dependency). 0001-girepository-introspection-correctly-install-.gir-fi.patch ensures correct installation of .gir into something else than $datadir (useful in multilib). Merge previous glib .bb into .inc, so that glib and glib-initial recipes could be cleanly separated with no duplication. Convert from gtk-doc to gi-docgen, and manpages from xmlto to docutils. (From OE-Core rev: 57c307536f67dcfb5d4a5488ca1e77a943ba1368) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-08sanity.conf: Require bitbake 2.9.1Richard Purdie
We need a recent siggen change in bitbake to allow SPDX to work better. (From OE-Core rev: 3d501e4b496be86b0089167af2f49cb750fc7ea2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-05-02base/bitbake.conf: Introduce UNPACKDIRRichard Purdie
Having the unpack directory hardcoded to WORKDIR makes it really hard to make any changes to the unpack process to try and allow for cleanup for example. As a first step toward unraveling the intertwined location usages, add a variable, UNPACKDIR which is where the fetcher is asked to unpack fetched sources. It defaults to the existing value of WORKDIR at this point. (From OE-Core rev: e022d62ba917790af2121da57646271ef17c03fa) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-23mpeg2dec: remove the recipeAlexander Kanavin
This is as well inactive for over 10 years, and has been superseded by ffmpeg long time ago. (From OE-Core rev: d46660e6c083baf7a7cf68a0eb98260246ccdcaf) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-23liba52: remove the recipeAlexander Kanavin
The component has been superseded by ffmpeg long ago, tarballs have disappeared from sourceforge, no work on it has happened in over 10 years. (From OE-Core rev: 90fbfe9fe1dab1568b85ee497520e789417d41f6) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-16layer.conf: Post release addition/switch to styhead corenameRichard Purdie
(From OE-Core rev: cef91ebeb3f2b1d41336fff60555064430a80397) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-16abi_version/sstate: Switch to a new version for the upcoming releaseRichard Purdie
In testing websocket hashequivalence, corrupted sstate was injected into the autobuilder extensively. With the new release/LTS, being able to clearly differentiate between old and new sstate is probably desireable anyway so bump the appropriate versions. (From OE-Core rev: 7f107c180f592be29f57f580c60a6adbbebd7714) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-14python3-websockets: Import from meta-pythonRichard Purdie
For the newer hash equivlance servers we need websockets. Import it from meta-oe so we can easily include it in buildtools tarball. (From OE-Core rev: c61ed007b9e06683065aed62af1e1ca4569b8c16) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-12bitbake.conf: remove comment about oldincludedirPeter Marko
oldincludedir was removed by 506c91cbc6a604a84e37e53ccff430436369802e (From OE-Core rev: 0228ab43e9b659771f4f59944897aec6879f8209) Signed-off-by: Peter Marko <peter.marko@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-04-04libseccomp: Add back in PTESTS_SLOW listSourav Kumar Pramanik
Enable libseccomp-ptest in PTESTS_SLOW as all tests are passing now. (From OE-Core rev: af3436a6f66262610e10444c7c97a39d20a5907f) Signed-off-by: Sourav Pramanik <pramanik.souravkumar@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-30run-postinsts: Add workaround for locking deadlock issueRichard Purdie
When run-postinsts is installed, a service is added for system which can run while the package is still being installed. This calls "opkg configure" and if package management is still running, it can deadlock and error. To work around this, call fcntl-lock on the opkg lock file and if the lock was held, it would wait to obtain it. This wait gives the package management time to finish the install before the configure can then take the lock and run. Note the dependency in SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS otherwise we'd see sstate selftest failures. Also ensure that if the configure fails, the scripts returns an error. This applies to opkg and dpkg. (From OE-Core rev: 96d37df074dc1fe1578c1406235dff7e328b62b7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-30liberror-perl: move to meta-perlTim Orling
The upstream maintainer for Error has deprecated it for quite some time [1]. The only dependency in oe-core was coreutils-ptest. [YOCTO #15461] [1] https://metacpan.org/pod/Error#WARNING Using the "Error" module is no longer recommended due to the black-magical nature of its syntactic sugar, which often tends to break. Its maintainers have stopped actively writing code that uses it, and discourage people from doing so. See the "SEE ALSO" section below for better recommendations [2]. [2] https://metacpan.org/pod/Error#SEE-ALSO SEE ALSO -------- See Exception::Class for a different module providing Object-Oriented exception handling, along with a convenient syntax for declaring hierarchies for them. It doesn't provide Error's syntactic sugar of try { ... }, catch { ... }, etc. which may be a good thing or a bad thing based on what you want. (Because Error's syntactic sugar tends to break.) Error::Exception aims to combine Error and Exception::Class "with correct stringification". TryCatch and Try::Tiny are similar in concept to Error.pm only providing a syntax that hopefully breaks less. (From OE-Core rev: 7750469e0acfb7f7ef5b3002d1562df5354e6a61) Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-25classes/qemuboot: add depends on qemu-system-native and qemu-helper-nativeRoss Burton
Any image that inherits qemuboot must also add image dependencies on qemu-system-native and qemu-helper-native, otherwise the image won't be able to be booted. Currently this is done by conf/machine/include/qemu.inc, but not every machine that uses qemuboot includes that file. Move the EXTRA_IMAGEDEPENDS from qemu.inc into qemuboot.bbclass, so that the dependencies don't have to be duplicated. (From OE-Core rev: dd54cf058f632e985917ff227483995f368e6a7d) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-22qemuriscv: Fix kbd and mouse emulation for qemuriscv64Khem Raj
(From OE-Core rev: 870bfc48f1d051831a9326b7f320abbbb6fa26d6) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-16layer.conf: Prepare for release, drop nanbield LAYERSERIESRichard Purdie
As we're close to release, drop compatibility to nanbield, people have had time to switch now. (From OE-Core rev: 0e42326dfd6b9042b405329ceb56a93199a89a85) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-07vulkan: upgrade 1.3.268.0 -> 1.3.275.0Alexander Kanavin
Add vulkan-volk recipe to support building latest vulkan-tools. (From OE-Core rev: d3d0375fa0b4809d2c69837faf5df297d92de683) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-07taglib: upgrade 1.13.1 -> 2.0 and add utfcpp recipe to support thatAlexander Kanavin
(From OE-Core rev: d264d2134ba169d29b857389fea88c58c38f377a) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-07python3-jsonschema: upgrade 4.17.3 -> 4.21.1 and add new dependenciesAlexander Kanavin
(From OE-Core rev: 61401c6c82b4e717fcec3810dd9ee5ee61292696) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-07mc: upgrade 4.8.30 -> 4.8.31Alexander Kanavin
Fish vfs was renamed to shell vfs: https://github.com/MidnightCommander/mc/commit/6ca4ab4b4ef0f42e9b56103038b7f45e146cbdc8 (From OE-Core rev: 3dc97bf745239a817af956e354b9b991bf108e59) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-07python3-sphinxcontrib-jquery: add a recipe and make python3-sphinx-rtd-theme ↵Alexander Kanavin
depend on it It's a hard dependency of recent python3-sphinx-rtd-theme versions: https://github.com/readthedocs/sphinx_rtd_theme/commit/4d6de11137333ede9842d535aa08b753dcb7f1b0 The issue is exposed by latest btrfs-tools update. (From OE-Core rev: 7a3d074f2d1679b4d4e52c4a023edb46224ca0be) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-06go: bump 1.22.0Jose Quaresma
Go 1.22 Release Notes https://go.dev/doc/go1.22 (From OE-Core rev: 170d7bc91537d723790dbe07c5b875b5e3ce57ee) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-05bmaptool: now part of Yocto ProjectTrevor Woerner
The bmaptool (previously: bmap-tools, bmap-tool, bmaptool) has been moved to be under the Yocto Project umbrella and is now hosted at: github.com/yoctoproject/bmaptool [RP: Added a couple of missing renames] (From OE-Core rev: 7a036b1a1ec7dcd27dbe18d4c2e703bd2a8af182) Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-03go: bump 1.21.0Jose Quaresma
Go 1.21 Release Notes https://go.dev/doc/go1.21 (From OE-Core rev: 51a3cb046de4cfd66ecef36031fa96be29ef0a2a) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-03no-gplv3: Tweak for packagemangement in core-image-full-cmdlineRichard Purdie
If we enable package-management for core-image-full-cmdline we need the workarounds used for core-image-weston to ensure the oe-selftest license QA tests keep working. (From OE-Core rev: 29bc855c167ff66aea7ca4681cee85c2557b2308) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-03-01rust: Upgrade 1.74.1 -> 1.75.0Yash Shinde
* Drop backported musl fixes. * Set `change-id` rather than `changelog-seen` to fix build warning. * Add fixes for 4b7e0a0b56aa24 ("Handle vendored sources when remapping paths") which otherwise cause build failures: | thread 'main' panicked at src/core/builder.rs:1795:26: | std::fs::read_dir(registry_src) failed with No such file or directory (os= error 2) https://blog.rust-lang.org/2023/12/28/Rust-1.75.0.html (From OE-Core rev: 9aec2c6c777388bb3129aa4c4f27a40f912522b4) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-27yocto-uninative: Update to 4.4 for glibc 2.39Michael Halstead
(From OE-Core rev: 56fdd8b79e2f7ec30d2cdcfa0c399a6553efac1e) Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-27loongarch64: change -march to loongarch64Xiaotian Wu
Now both gcc and clang all support -march=loongarch64, so we can use it. (From OE-Core rev: acc08582293709c73011083aa7d5c631a9ae8c8c) Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-24lib/oe/package: fix LOCALE_PATHS scan to create locale packagesJonathan GUILLOT
split_locales() must only check subdirectories in paths added to LOCALE_PATHS to avoid creating weird packages based on filenames also present in paths. Without such a filter, cups recipe adding ${datadir}/cups/templates to LOCALE_PATHS creates the following incorrect packages: - cups-locale-add-class.tmpl - cups-locale-add-printer.tmpl - cups-locale-admin.tmpl (From OE-Core rev: ba3aee0d516bd066829d6edaa8d7bacdd75dd6ef) Signed-off-by: Jonathan GUILLOT <jonathan@joggee.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-20python3-meson-python: move from meta-pythonTim Orling
meson-python is a Python build backend built on top of the Meson build-system. It enables you to use Meson for your Python packages. https://meson-python.readthedocs.io/en/latest/ It is used as the PEP-517 build-backend for python3-numpy and python3-scipy. For other projects using the backend, see: https://meson-python.readthedocs.io/en/latest/projects-using-meson-python.html (From OE-Core rev: 57df1e3fd77a412fb7d585362a7263a4f847fe07) Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-20python3-pyproject-metadata: move from meta-pythonTim Orling
This is a dependency for python3-meson-python. (From OE-Core rev: b8c8d384b4622de7b5a4748e6e06665615674ba8) Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-19sanity.conf: Require bitbake 2.7.3Richard Purdie
Due to hashserv API changes in siggen, we need bitbake 2.7.3. (From OE-Core rev: 7172fd527fde440f26dd6cc371cde2720dbaa366) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-19meta/conf/templates/default/conf-summary.txt: add a template summaryAlexander Kanavin
Existing conf-notes.txt is not adequate in situations where the user needs to select a config template from several, or get an overview of them and is interested only in a brief explanation of what the template is for, but not extended multi-paragraph instructions for how to use it. Such summaries can be provided via conf-summary.txt and this patch adds such a summary for the oe-core default template. Updates to the tools and a tool for selecting templates which will make specific use of the summary will follow. (From OE-Core rev: aa96c2064a874714cfe4bac2fa622690e4c27ee4) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2024-02-16meta/conf/templates/default/conf-notes.txt: removeAlexander Kanavin
This is present in the poky repository, even though it should not be: https://git.yoctoproject.org/poky/tree/meta/conf/templates/default I couldn't find which tool leaves the file in place when combining oe-core/bitbake/meta-yocto repos into poky, so this patch is rather a request to point me to where it happens (or just fix it directly there). Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-12 21:51:07 +0000